- ページ 6

モニター Acer AL2016WのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Acer AL2016W 12 ページ。 Quick start guide
Acer AL2016W にも：マニュアル (11 ページ), マニュアル (12 ページ), 仕様 (2 ページ), クイック・スタート・マニュアル (1 ページ)

ページを印刷する

(1)

Power Cord

(2)

VGA Cable

(3)

DVI Cable (option)

WARNING:

The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches

the shape of the socket it is inserted into, and that none of the pins are bent or otherwise damaged.

Operating Your Monitor

First, switch the power on to the monitor, then switch the power on to the computer. When you see the LED on

the power button go green, this indicates the computer is ready for use. Allow about 10 seconds for the video

signal to appear. If you do not see the green light on the power button or a video signal, check the connections .

AUTO

OSD Options

Please refer to "External Controls " on Page 5. To adjust the OSD settings :

1. Press the MENU button to open the OSD menu .

2. Use the buttons marked < or >, to highlight a control, then press the MENU button to enter

3. Use the buttons marked < or >, to adjust the control to the desired level.

4. When you have finished making all selections, press the MENU button to exit the OSD. (Or the adjustment

will auto-save after 45 seconds.)

Attach the monitor to the power cord which should then be

inserted into a properly grounded electric socket.

Connect the signal cable to the VGA output socket of the graphics card

on the computer. Then tighten the thumbscrews on the connector

Connect the signal cable to the DVI output socket of the graphics card

on the computer. Then tighten the thumbscrews on the connector

If OSD is active, press to exit. If OSD is inactive, press and the

monitor will automatically optimize the display position, clock and

Auto Configuration

phase of your display.

If OSD is active, press to select or adjust OSD options.

Minus

If OSD is active, press to select or adjust OSD options.

Plus

Press to view OSD. Press again to exit.

OSD Manual

Power on/off

Power

Green: power on

Orange: in sleep mode