- ページ 4

リモコン COASTLINE WindlassのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。COASTLINE Windlass 12 ページ。 Radio remote control

Remote

Operation

To switch on the Remote press and hold down both buttons for 2 seconds. The

green led will light up indicating that the remote is now 'awake'.

Release both buttons and the green led will go out and the Remote is ready for

use.

The Remote switches itself off after 10 minutes of inactivity.

The 2 second 'switch on' routine is a deliberate safety measure to prevent

unintentional operation of the windlass

In normal operation the green led is on continuously while a button is pressed.

If the green led flickers this indicates poor communication with the Receiver.

SAFETY

Great care should be taken with the windlass operation to ensure that

anyone on the foredeck is well clear of the anchor chain and windlass

mechanism when the windlass is operated.

Anyone using the Remote away from the foredeck must ensure that all

foredeck crew are safe.

Special Functions

For normal operation no additional commands are required to operate the

system, however spare Remotes can be added to the system and these are

programmed with the same Receiver ID code. See 'Special Functions' towards

the end of this manual.