- ページ 7

ラボラトリー機器 10x Genomics Chromium Controller Readiness TestのPDF マニュアルをオンラインで閲覧またはダウンロードできます。10x Genomics Chromium Controller Readiness Test 7 ページ。

READINESS TEST

b) Place the Test Chip assembled in 10x™ Chip Holder with a 10x™ Gasket installed on the

tray (align the diagonal etchings on the top left corner of the 10x Chip Holder and the

back left corner of the tray).

c) Press the button to retract the tray. Confirm the Chromium™ Test program shows on

screen and press the play button to begin the run.

Holder and 10x Gasket in the tray and

d) At the completion of the run (3 min), the Chromium Controller will chime. Press the

button to eject the tray. Remove and disassemble the Chip Holder assembly. Press the

button again to retract the empty tray.

After the run is completed, press the

e) If there are any problems during this process, contact [email protected]

for further assistance.

Save the 10x Chip Holder for use with your Chromium Controller. The 10x Gasket and

Test Chip should also be stored.

__________________________________________________________________________________________________

Chromium™ Controller Readiness Test

Place the assembled Chip, 10x Chip

press the button to retract the tray

eject button to eject the tray

Confirm the Chromium Test program

shows on the screen and press the

play button to start the run

Remove the Chip Holder assembly and

press the button again to retract the

tray