- ページ 2
ラボラトリー機器 10x Genomics Chromium iX SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。10x Genomics Chromium iX Series 5 ページ。
ページを印刷する
Chromium X Series (X/iX)
Step 1: Installation
Before unboxing the instrument choose a
location that:
• Is not in direct sunlight.
• Provides maximum bench space (front to back).
• Allows access to the wall plug and to the
detachable power cord at the rear.
Ensure ground is reliably connected
before plugging the instrument's power
cord into the power source (receptacle).
• Includes a level sturdy laboratory bench that
is not subject to movement or vibration.
• Provides a minimum of 4" (10 cm) clearance
around unit to allow free air circulation.
• Provides a minimum of 6" (15 cm) directly in
front of the instrument for unobstructed
movement of the tray door.
Warning: The tray door is capable of
moving an object that is in its opening
path. If an object is near the edge of the
workspace, it could fall and create a hazard.
Heavy Load: Instrument only 41.4 lb
(18.8 kg); two-person lift. Instrument in
package ~58 lb (26.3 kg); team lift.
Unbox
a. Open box according to box label "this side up."
Carefully cut or remove the tape on the top of the box
and open the top flaps. Ensure that cut is not too deep
as it may damage the Upgrade Kit box (present only if
Chromium X upgrade was purchased).
b. Remove the Upgrade Kit box (present only if
Chromium X upgrade was purchased) and
packaging material. Carefully lift inner box
out and open inner box according to box
label "this side up."
Refer to the Chromium X Series (X/iX) User Guide (CG000396) for complete information
Quick Reference Cards |
CG000471 | Rev A
DO NOT POWER ON UNTIL READY
FOR
FIRST-TIME USE SETUP
Chromium X
Upgrade Kit
(only present when X
upgrade purchased)
Inner Box
Outer Box
c. Remove the Chromium iX Accessory Kit
box and packaging material.
d. Carefully lift the Chromium X/iX instrument
out of the box and place on bench top.
Remove all transportation packaging
materials and tape.
e. Within the Accessory Kit box, locate the
universal power cord and plug adaptors.
Attach the correct country adaptor to the
universal adaptor.
f. Plug the Chromium X/iX into a properly
grounded outlet of proper voltage.
DO NOT power on yet.
g. If using an Ethernet cable (not provided)
to connect to the network, connect cable
directly to the instrument.
Chromium iX
Accessory Kit
Chromium
X Series
Instrument
Inner Box
10xgenomics.com
2