ページを印刷するCAUTIONS BEFORE USE
The working environment
· Keep the unit 30cm or more from the wall or funiture.
· Keep the unit 1 meter or more from the TV or computer.
Installation of the filters
(1)
Take off the cover of filter on the back panel.
(2) Take out the HEPA, activated carbon and photo catalyst filter, tear off the protective
bag and install it.
Take off filter cover
Power setting
Please do not connect to the wrong rated power supply, insert the plug firmly into the power socket.
Be sure to
use a ground
socket.
Disassembly and installation of the cover
Diagram of disassembly:
Press the place of button on the
filter cover through thumb or first
finger, then open the cover.
Diagram of installation:
Please set the two fixing points of
the filter bottom into the fixing slot
of unit, then close the filter cover.
Installation is finished when you
Set fixing place into fixing slot
hear the clear voice "KA".
7
Install HEPA, activated
carbon and photo catalyst
Press place of button
Disassembly cover of filter
close filter cover
OPERATING INSTRUCTION
Function setting
(1). The unit will start to work while turn the rotary button to right side, the power LED
will light. There are three fan speeds avilable, high, medium and low.
(2). HEPA, activated carbon, photo catalyst, UV lamp and ion are normal functions.
Once the unit is turned on, all these functions are working.
Power
Low
Off
Power
Power
Low Medium
Low Medium
Off
High
Off
Low
Medium
Medium
High
Power
Low Medium
High
Off
High
High
8