- ページ 4

ヒーター Aktobis AG WDH-BGP03ProのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aktobis AG WDH-BGP03Pro 8 ページ。

Instructions for use:

Commissioning

1.1 Insert the mains plug properly into the socket.

1.2. Select the desired unit power with the operating power adjustment knob (left-hand

knob).

= Off

= Fan operation (cold blower)

= Level 1 (medium operating strength with 1,500 W heating power)

= Level 2 (highest operating strength with 3,000 W heating power)

1.3 Now set the desired temperature switch-off point (0 ~ 45°C) with the stepless

thermostat control dial (right-hand knob). It is best to do this as follows: Turn the

thermostat knob to the highest temperature (MAX.) and let the heater run until your

desired temperature value is reached. Now turn (adjust) the control downwards

towards the minimum until the heating function switches off automatically. Now let the

control dial

(thermostat) on this position and whenever it gets colder in the room, the unit

automatically starts heating and when the adjusted temperature is then reached again,

the unit automatically switches off again !!!

Switch off

To switch off the unit, turn the stepless thermostat control knob (right-hand knob) to

minimum (MIN) and let the unit run in fan mode for about 5 minutes to allow it to cool

down. Afterwards, also turn the operating strength adjustment knob to "0" to switch off the

unit completely.

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de