ページを印刷する3.
Cleaning & storage
Please always disconnect the mains plug and allow the heater to cool down completely
before cleaning your heater!
3.1 Cleaning the housing:
-
Use a soft, damp cloth to clean the outside of the housing.
-
Only use mild cleaning agents to clean your heater.
-
It is also important to ensure that no aggressive cleaning agents are used, as these
can damage your appliance!
-
Please ensure that no water gets inside your heater at any time!
3.2 Storage:
-
We recommend that you put the appliance back in its original box for storage.
-
Store the heater in a dry and sufficiently ventilated place.
4.
Other operating instructions
4.1. Do not disconnect the mains plug by pulling on the power cable!
4.2. Do not use insect repellent, oil or paint spray etc. near the
heater. This can damage the appliance or even cause a fire!
4.3. Do not place the appliance on a sloping or uneven surface!
4.4. Please always keep a sufficient distance from the wall to prevent the appliance from
overheating.
4.5. For effective and economical heating operation, please close all doors and windows in
the heater room!
4.6. Ensure a minimum distance of 60 cm from bathtubs, showers or swimming pools.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: [email protected]