- ページ 5

ダイビング機器 AKUANA OpahのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AKUANA Opah 11 ページ。 Heated vest

OPERATION INSTRUCTIONS(1):

Charge the battery

• Charge the battery before use.

• Plug in the connectors as shown in drawing (1).

• Plug your charger into an electric outlet with the

electricity range of 100V-240V, 50/60Hz, AC current.

• The charger indicator will display red when charging and

will display green when complete.

• The charging time for standard battery [2500mAh] will

take approximately 2 hours and for the high capacity

battery [5000mAh] approximately 4 hours.

Wear the suit

• The Opah heated vest need to be worn under an isolation

layer such as wetsuit or drysuit to ensure function

properly.

• Plug connector

and

together tightly as shown in

drawing (2).

• Place the battery

in the battery pocket

before

wearing up.

• Stretch the cables well and store them in the pocket

neatly.

• Wear the suit up and make sure the receiver

naturally hung before your chest and easily reachable.

• Seal up the zipper gently.

• Wrap the wrist band controller up securely on your wrist.

The wrist band controller is the only device to turn on/o

the suit. Please store it securely after each use.