- ページ 2

フィットネス機器 BoBo boboproのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。BoBo bobopro 2 ページ。

BoBo bobopro ユーザーマニュアル
Instructions for use
Please observe the following precautions before each use of your bobo:
• Select a safe balance platform to be placed underneath the bobo and prior to each use
inspect for nicks, tears, punctures, or other defects that may cause the balance platform
to fail. Do not use a balance platform in which such defects are found.
• After placing the bobo at the center of the selected balance platform, make sure that the
bobo is properly balanced on the pivot surface. Do not use the bobo if it glides or slips
from the pivot surface.
• Always use the bobo and the balance platform in an open area on a flat stable surface
away from furniture, walls and equipment. Do not use on an incline.
• Inspect the floor surface for objects which could damage the balance platform.
• During practice, make sure that you have firm support such as a wall or a stable table
within an arm's reach. (not sure how this works with comment above saying away from
furniture, walls...)
• Do not engage in bouncing or jumping exercises while using the bobo.
• No more than one person should use the bobo at a time.
• Avoid stepping or standing on the edges of the bobo.
• Do not use tape, nails, or similar means to attach the bobo to the balance platform.
• Do not expose the bobo to liquids or extremes of heat or cold.
• Do not use the bobo if you are under the influence of alcohol or any other substance that
could affect your sense of balance or perception which could cause you to slip or fall.
• An adult must explain all safety information and usage guidelines children or other users
with a mental or cognitive problem. Failure to do so may result in bodily injury and/or
damage to the system or other property. Observe children during gameplay for proper and
safe use of the bobo.
• An adult should initially assist young children in making sure they understand the correct
usage.
Importent safety instructions
• Do not dismantle, disassemble, open or otherwise alter the bobo. There are no user
serviceable parts.
• The bobo contains a lithium-ion battery which can be combustible. Keep away from heat
source such as fire, oven, microwave oven, direct sunlight, heat-generating equipment, etc.
• Keep the bobo dry. Do not use with wet hands or in a wet environment. Moisture can
cause electric shock.
• The bobo may heat up during use. This is normal.
• If the battery emits a liquid, stop using the bobo immediately and contact qualified service.
• Ensure that bobo usage is in accordance with the manufacturer instructions.
• Do not leave the unit in charge mode for a long time. Overcharging can damage the bobo.
• Use only the charger included with the bobo. Using an incorrect charger may result in
overheating, fire or explosion of the battery.
• Extended recharge without discharging the battery may cause overheating. A fully charged
bobo should be used for 12 hours before recharging.
• Do not store the bobo in a hot or humid environment such as car parked in sunshine, etc.
BO&BO LTD. ASSUMES NO LIABILITY FOR INJURY OR DAMAGES THAT MAY OCCUR WITH
THE USE OF THIS PRODUCT. THE CONSUMER ASSUMES ALL LIABILITY AND USES THIS
PRODUCT AT THEIR OWN RISK.
COPYRIGHT All Rights Reserved BO&BO Ltd. 2020. Manufacturer details: Company:
BO&BO Ltd. / O.C ID: 515218261 / Address: 11 Ha'avoda st Rosh-Ha'ain, Israel /
Phone: +972 35731198. / E.A.R. - Obelis S.A. Boulevard Général_Wahis 53, B-1030
Brussels, BELGIUM.
For technical support please write us at: [email protected] / For any other
issues, please contact us at: bobo-balance.shop
Maintenance instructions
• Avoid the unit being dropped.
• Avoid contact with water.
• Do not disassemble or insert foreign objects into the unit.
• Do not wipe the surface of the unit with alcohol or abrasives.
Troubleshooting
What to do if the BOBO does not connect to the TV box?
• Turn on the bobo, wait 10-20 seconds and verify that the
diagonal line on the bobo board sign on the top-right corner
had disappeared.
• If the diagonal line does not disappear, wait another minute.
• Verify that Bluetooth is enabled on the TV box.
• Turn off the TV box Bluetooth, wait 10 seconds and turn it on
again. Wait 10-15 seconds.
• bobo may be connected to a different device nearby. If this is
the case, close the bobo app from the background of that
device before trying to connect to the desired device.
• Bluetooth pairing is automatic. Make sure you do not pair bobo
using the Bluetooth Settings on your TV box. If bobo was
paired this way, on your TV box, go to settings > Bluetooth and
press on bobo. Choose the forget option.
• Turn off the bobo and reset the TV box. Wait until the home
screen re-appears. Now, power on the bobo again and wait for
a minute.
• Make sure that the bobo's battery is charged by connecting the
charger cable to the bobo and checking the charging status.
What should I do if the status light is off?
• Try to Power on the bobo by pressing the power button.
• Charge the bobo, ensuring the cable is properly connected to
the USB port.
• The bobo status light will blink orange while charging.
• The bobo will not operate properly while charging.
• The bobo does not work while charging!
Attention! Read before use
Children must have adult supervision!
Caution! Slippery when wet!!!
Use a support device if required!
Clear the exercise area from foreign objects
Please read the detailed safety instructions
The TV Box
Headset
Ethernet Port
USB
HDMI
TF Card
Getting started
1. Screw in the Antenna to the Antenna port on the back of the TV box.
2. Insert the power cable into the DC socket,
and then insert the other end into the power socket.
3. Insert the HDMI cable into the HDMI socket,
and then insert the other end into the display screen.
4. Turn on the TV box by holding the power button for 3 seconds.
5. The loading logo will appear on the screen after a few seconds.
Power On/Off
1. Power on the TV box by holding the power button for 3 seconds.
2. Power off the TV box by holding the power button for 3 seconds,
and click 'power off' on the screen.
3. Turn the product into sleep mode and wake it back by a short
press on the power button.
Power button
Anttena Port
DC
Anttena