- ページ 2

ストーブ barkman Quarry StoneのPDF マニュアルをオンラインで閲覧またはダウンロードできます。barkman Quarry Stone 4 ページ。 Rocket stove
barkman Quarry Stone にも：マニュアル (16 ページ), マニュアル (8 ページ)

ページを印刷する

Materials

This kit measures 12 x 28 x 28 (inside)

MATERIALS INCLUDED:

• 12" x 8" Quarry Stone – 36 pieces

• Spark Arrestor

• Gloves

• Instruction Guide

SOLD SEPARATELY :

• Steel Fire Pit Liner

OTHER ITEMS NEEDED:

• Measuring Tape/Ruler

• Level

Base Preparation

For installation on an unstructured

base, please follow these steps:

1. Mark out the location for your fire pit.

Excavate area approx. 5" below grade.

2. Excavate approx. 6" larger than your

actual kit dimensions to ensure a

stable base

Read Prior to Installation

REGULATIONS

1. The consumer is responsible for reviewing

the local regulations pertaining to the

installation and use of this product.

Please confirm that use of this product

is in compliance with the by-laws,

regulations, building codes and laws

of your jurisdiction before using.

2. Locate your respective gas lines, wires,

water pipes, and/or any above ground

and underground services in your area.

Install your Barkman fire pit kit the proper

distance away from them. Check with

your provider for location and distance

requirements prior to installation.

06-2021 | For manual updates, check BarkmanConcrete.com/resources

12 x 8

Quarry Stone

3. Fill 4" with 3/4" limestone and

compact.

4. Level out 1" of sand and install kit as

per the instruction guide.

3. Check with your insurance provider

concerning the installation, use,

value implications and/or any other

considerations in regard to your fire pit.

LONG TERM USE

1. Barkman wall blocks are not fire-

rated and are not covered under the

Barkman warranty. It is the customer's

responsibility to ensure that the wall

blocks are adequately protected.

Firebricks or a fire pit liner are

recommended to improve the integrity

of the product.

Spark

Steel Fire Pit

Arrestor

Liner (Sold Separately)

For installation on a solid base such as

an existing patio:

1. Once installed, insulate the patio from

the fire using all-purpose sand or rock

to fill in the fire pit.

2. Base prep and excavation is not

necessary. Proceed to Step 1.

2. Barkman fire pit liners will eventually

rust after prolonged fire exposure. An

oil-based rust paint spray can be used for

added protection or after rust occurs.

3. This fire pit is not suitable for large fires.

Do not allow flame to contact the top

layer. Fire pits should not be placed

directly on concrete as high heat can

adversely affect the integrity of the

product.