- ページ 8
トイレ Bobrick 1085のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Bobrick 1085 10 ページ。 Urinal screens, benches & shower seats
ページを印刷するSTEP 1
BENCH/SHOWER SEAT INSTALLATIONS
Fig. 1a: Bench 1040 Series
Sheet Metal
Screws
3/4''
19mm
Bracket
''D''
Sheet Metal Screws
2''
50mm
Finish Face of Floor
Fig. 1b: Shower Seat 1080/1180 Series
(Panel Installation)
Phenolic Shower Seat
Bracket
''D''
Finish Face of Floor
Page 8
Form No. 1045-69 r5/21/14
Masonry Wall
Panel
Plain
Washers
12''
305mm
© 2014 Bobrick Washroom Equipment, Inc.
A. Mark holes on one side of bench using mounting
brackets as templates. Mounting holes to be 3"
maximum from each end of seat.
B. Drill #19 (.166) x 3/4" (19mm) deep holes in seat.
Caution: Do Not Drill Through.
C. Attach brackets with #1002500 screws.
D. Support bench so that height of bench complies with
local building codes. Bench must be level with the floor
in all directions and mounting brackets must be flat
against the wall.
E. Using brackets as templates mark and drill #19
(4.2mm) into wall 2" deep.
F.
Attach brackets to wall with #1002495 screws.
G. Test and examine bench and fasteners and brackets to
make sure there are no loose parts.
A. Mark holes on one side of shower seat using mounting
brackets as templates. Mounting holes to be 3" max.
from each end of seat.
B. Drill #19 x 7/16" (5.5 x 11mm) deep holes in seat.
Caution: Do Not Drill Through.
C. Attach brackets with #1002499 screws.
D. Support seat so that height of seat complies with local
building codes. Seat must be level with the floor in all
directions and mounting brackets must be flat against
the panel.
E. Using brackets as templates mark and drill #10
(4.8mm) holes through panels.
F.
Attach brackets to panel with #10-32 x 1-1/4" machine
screws, hex nuts and washers.
G. Test and examine seat, fasteners and brackets to
make sure there are no loose parts.
Printed in U.S.A.