- ページ 2

パーソナルケア製品 Bobrick B-169 2436のPDF 技術データをオンラインで閲覧またはダウンロードできます。Bobrick B-169 2436 2 ページ。 Led sidelit mirror

ページを印刷する

INSTALLATION:

Mark the location of the wire exit and mounting holes. See individual product speciﬁ cations

for mounting hole locations. Install a duplex receptacle (not provided).

The mirror has a 30" cord with three-prong plug, so the outlet should be installed a few inches

away from the wire exit. Locating it too close to the wire exit may interfere with the power

supply housing and prevent the mirror from being plugged in properly.

Install mounting screws into pre-marked holes. It is highly recommended that all mirrors

be installed in contractor supplied blocking, however, drywall anchors may be used if no

blocking is available.

For added safety, Bobrick recommends the 55-1/8" x 25-5/8" (1400 x 650mm) or larger edge

lit mirror only be installed in blocking. If blocking is not available, drywall toggle bolts (not

provided) should be used.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

Read all instructions before using this mirror.

DANGER - To reduce the risk of electric shock; Always unplug this mirror from the

electrical outlet before cleaning.

WARNING - To reduce the risk of burns, ﬁ re, electric shock, or injury to persons:

• Unplug from outlet before putting on or taking off parts.

• Close supervision is necessary when this mirror is used by, or near children, invalids,

or disabled persons.

• Use this mirror only for its intended use as described in these instructions.

• Never operate this mirror if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged,

or dropped into water. Contact elio for a replacement mirror.

• Keep the cord away from heated surfaces.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• WARNING: Risk of electric shock - Connect this mirror to a properly grounded outlet only. See grounding instructions.

GROUNDING INSTRUCTIONS

This mirror is for use on a nominal 120V circuit and has a three prong grounding plug that looks like the plug illustrated in

sketch below. Make sure that the mirror is connected to an outlet having the same conﬁ guration as the plug, No adapter

should be used with this mirror.

Grounded

Outlet

Grounded

SPECIFICATION:

Mirrors shall have a 1mm thick anodized AL6061 frame. Integral UL recognized power supply must have 24V output and 110

– 277V input along with 0-10V dimming option. Reﬂ ective surface shall be 0.6" (1.5mm) thick and covered with a 0.14mm PVC

ﬁ lm backer with frosted sandblasting. Lead free silver backing shall exceed ISO 9227:2012 and exceed 120-hour corrosion

testing. Aluminum mounting panel shall contain key hole slots both top and bottom to provide easy installation and prevent

the mirror from pulling away from the wall.

LED Sidelit Mirror shall be Model B-169 _______________ (insert width and height) of Bobrick Washroom

Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom

Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick

Washroom Equipment Limited, United Kingdom.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.

Grounded

Outlet Box

Adapter

Metal

Screws

Tab for

Grounding Screw

B-169 Revised 8/31/18

Printed in U.S.A.