- ページ 16
制御システム BobsCNC E3のPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。BobsCNC E3 16 ページ。 Cnc router engraver bearing and rail dust kit
BobsCNC E3 にも： マニュアル (8 ページ), クイック・スタート・マニュアル (3 ページ)
ページを印刷する
- 1. Table of Contents
- 2. My Stepper Motors Are Running Backward
- 3. My Z Axis Is Not Homing Correctly
- 4. My E3 will Not Home Correctly (Diagnosing Home Switches)
- 5. My Firmware Does Not Seem to be Working
- 6. I Tried to Use Easel, Now My Machine Does Not Work Correctly
- 7. I Get and Error When I Run a G-Code File Made with F-Engrave
- 8. My Z Stepper Motor Wobbles Excessively
- 9. My Machine Seems to be Skipping some Commands
- 10. What Are the Alarm Code Descriptions
- 11. How Do I Change My Current Setting on the Stepper Motor Drivers
- 11. Setting the Current on the A4899 Stepper Motor Driver with a Volt Meter
- 11. Setting the Current on the A4899 Stepper Motor Driver Without a Volt Meter
- 12. The Dewalt Motor Shaft Came out During Assembly. (Dewalt Brush Remove and Replace)
Insert the 4 screws.
Remove the mounting screw and carefully continue to install the DeWalt to the E3 router mount as
shown in the assembly manual.