ページを印刷する
2.
Connecting the camera to a computer.
1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
Slip a fingernail under the bottom edge of the camera's DIGITAL
terminal cover, lift up and plug the interface cable in all the way.
Interface Cable
2. Turn the camera's mode dial to
(playback) and turn on the power.
The camera and computer will be able
to communicate.
Always grasp the sides of the connector when
disconnecting the interface cable from the camera's
DIGITAL terminal.
click [Yes]. The USB driver will automatically finish installing
onto the computer when you attach the camera and open a
connection.
USB Port
If the Digital Signature Not Found window appears,
DIGITAL Terminal
Interface Cable
27