- ページ 33

デジタルカメラ Canon AE-1のPDF インストール手順マニュアルをオンラインで閲覧またはダウンロードできます。Canon AE-1 48 ページ。
Canon AE-1 にも：はじめに (2 ページ), 取扱説明書 (22 ページ), マニュアル (42 ページ), マニュアル (12 ページ), 取扱説明書 (22 ページ)

ページを印刷する

1. Installation Procedure

Making Checks after Adjustment

1) Check to see once again the that the difference in

height between the finisher and the puncher unit

and the tilt are as indicated; If not as indicated, start

over the adjustment work.

2) When done, tighten the two fixing screws [l] each

on the casters.

3) To prevent the adjusting bolts from becoming loose

during transit for possible relocation after installa-

tion, tighten the bolts [2] 90 deg in the direction of

the arrow. Take care, however; excess tightening

will affect the heighthilt.

4) Attach the spanners to the back of the front cover

using a screw.

5) End the installation work as instructed in "Installa-

tion after ChecksIAdjustments" and later.

3.2.2 Installation after Checks/

Adjustments

<Finisher-AE l >

1) If you have removed the auxiliary ring, mount the

rear left foot cover, and adjust the auxiliary rail to

suit the needs of the user, and

fur

it in place using

four screws.

2) Mount the front cover to the finisher using three

screws.

3) Mount the lower front extension cover [I] using a

screw [2] (RS tightening; M3 x 8). Mount the fiont

foot cover [3] using a screw [4] (RS tightening; M3

x 8).

4) Connect the finisher and the host machine using an

interface cable [I].