- ページ 6

スチームクリーナー Euro-Pro S3305HのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Euro-Pro S3305H 6 ページ。 120v., 60hz., 800 watts

ページを印刷する

FEATURES

Your Steam Mop utilizes steam to remove tough grease,dirt and grime. Steam is

nature's purest and most powerful cleaner for safely cleaning all hard floor surfaces in

your home without harsh chemicals, thus being perfectly ecological. Cleans your tile,

hardwood , linoleum and vinyl floors.

WARNING:

Your Steam Mop is designed to clean hard floor surfaces that

will withstand high heat. Do not use on unsealed wood or

unglazed ceramic floors. On surfaces that have been treated

with wax or some no wax floors, the sheen may be removed by

the heat and steam action. It is always recommended to test an

isolated area of the surface to be cleaned before proceeding.

We also recommend that you check the use and care

instructions from the floor manufacturer.

IMPORTANT:

Never leave the appliance in one spot on any surface

for any period of time. Always place the appliance on the

floor protector pad and make sure that the appliance is

turned off.

CAUTION:

Use a grounded receptacle. Use only a heavy duty extension

cord rated for 15 amps minimum - Do not use an ordinary

extension cord.

IMPORTANT:

Do NOT add cleaning solutions, scented perfumes, oils or

any other chemicals to the water used in this appliance.

Use regular water or distilled/purified water if the tap

water in your area is very hard.

OPERATING INSTRUCTIONS

How To Assemble & Use

IMPORTANT:

Always insure that the

unit is "UNPLUGGED" from the wall

receptacle prior to initial filling and before

attaching the micro-fiber cleaning cloth to

the base of the appliance. Never use the

steam mop without the micro-fiber

cleaning cloth or bonnet (optional)

attached to the base.

Always let unit cool for at least 5 minutes

before removing the micro-fiber cleaning

cloth or before emptying the water tank.

1. Remove all the parts from the

packaging.

2. Insert the ergonomic handle into the

tube pivot of the main unit.

3. Place one of the micro fiber cleaning

cloths or bonnet (optional) on the

bottom of the steam mop. Make sure

that the micro-fiber cleaning cloth or

bonnet (optional) is firmly attached to

the bottom of the steam mop. (Fig. 1)

4. Place the steam mop on the floor

protector pad and open the filling

cap.

5. With the help of the filling flask, pour

1 cup of water (8 oz.) Into the unit. do

not overfill.. Replace filling cap when

finished. (Fig. 2)

Fig. 1

Fig. 2

6. Plug the unit into a standard 120 volt

grounded wall receptacle.

7. Press the On/Off button to turn the

unit on. The power 'On" light will light

up. It takes the unit approximately

two - three (2-3) minutes to heat up.

8. When there is no more water in the

water tank, the empty light (red) will

go on.

9. To refill the water tank, turn the unit

off and unplug from the electrical wall

outlet and let the unit cool for 30

seconds. Then remove the filling cap

and pour in the water. You do not

have to wait for the unit to cool down

before you refill.

10. When you have finished using the

steam mop, turn the unit "Off" and

wait until the steam mop cools down

for approximately five (5) minutes

before removing the micro-fiber

cleaning cloth or bonnet (optional)

from the base. Please note that the

micro-fiber cleaning cloth or bonnet

(optional) gets very hot with the

steam.

11. Never leave the micro-fiber cleaning

cloth or bonnet (optional) on the unit

when you have finished using the

steam mop. Always remove the

micro-fiber cleaning cloth or bonnet

(optional) and wash in warm water

with a mild detergent. Never use

bleach or fabric softener when

cleaning the micro-fiber cleaning

cloths or bonnet (optional). The

micro-fiber cleaning cloth or bonnet

(optional) can be washed in a

washing machine and dried in a

clothes dryer but on a low heat

setting. We recommend that you air

dry for 24 hours.

WARNING: Colors may bleed

during first wash. Be careful when

machine washing or drying with

mixed fabrics as micro-fiber cloths

will pick up lint from other fabrics.

Using The Micro-Fiber

Bonnet

(Optional)

If you wish to use the micro-fiber bonnet

(optional), follow same instructions as

above, except that you slip the bonnet

(optional) over the main unit.