- ページ 12

マイクロ・ミュージック・システム Akura APTUC-2110PRのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Akura APTUC-2110PR 14 ページ。

SLEEP

1. Press the "SLEEP" button on remote control, display will show "SLEEP 90". That means, after 90

minutes, appliance will automatically turn to standby mode.

2. Press the "SLEEP" button again to select the automatically turn off time, from 90, 80, 70, 60, 50,

40, 30, 20, 10 minutes.

3. Press the "SLEEP" button to "SLEEP 00" to canel sleep function.

CLOCK SETTING

1. Press the "STANDBY" button to switch to standby mode.

2. Press the "MEMO / ADJ." button twice to entry clock set mode. The display will show "24H" and

flashing.

3. Adjust time format ( 12H / 24H ) by pressing the "SKIP +" or "SKIP -" button.

4. Press the "MEMO / ADJ." button to confirm time format, display will show "AM" or "PM" if 12H

format is set.

5. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "MEMO / ADJ." button to confirm.

6. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "MEMO / ADJ." button to confirm.

Notes:

Because the clock setting is in standby mode the display is dim. As no "Backup battery" is included,

if the Mains switch is turned "OFF" the clock and timers must be reset when power is re applied.

Timer settings must be done after completing clock settings

1. Press the "STANDBY" button to switch to standby mode.

2. Press the "MODE" button on the remote control to enter the "Timer Set Mode".

3. The display will show "TIMER ON", press the "MEMO / ADJ" button to enter "TIMER ON" setting.

4. Adjust the Hours by pressing "SKIP+ or SKIP-" buttons, press the "MEMO/ADJ" button to confirm.

5. Adjust the Minutes by pressing the "SKIP+ or SKIP-"buttons, press the "MODE" button to confirm.

6. The display will show "TIMER OFF", press the "MEMO /ADJ" button to enter "TIMER OFF" setting.

7. Adjust the Hours by pressing "SKIP+ or SKIP-" buttons, press the "MEMO/ADJ" button to confirm.

8. Adjust the Minutes by pressing the "SKIP+ or SKIP-"buttons, press the "MODE" button to confirm.

9. The display will show "TIMER", set the source you want to play.

10.Press the "MEMO /ADJ" button to set desired mode (Tuner or DISC).

11.Press the "MODE" button to confirm the Timer setting.

12.Press the "TIMER" button to activate timer function.

13.Press the "TIMER" button to terminate or cancel a timer setting.

OTHER FEATURES

E-11