室内装飾品 American Standard Colony FitRight Round Front 12" Rough-In Toilet 4003.016のPDF 仕様書をオンラインで閲覧またはダウンロードできます。American Standard Colony FitRight Round Front 12" Rough-In Toilet 4003.016 1 ページ。 Elongated 12" rough-in toilet
ページを印刷する
COLONY™ FitRight™ RIGHT HEIGHT™
ELONGATED 12" ROUGH-IN TOILET
❑
2437.012
• Vitreous china
• Low-consumption (6.0 Lpf/.6 gpf)
• 6-/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• Pilot valve water control
• Fully glazed 2" trapway
• 2" Flapper flush valve
• Color-matched trip lever
• Sanitary bar on bowl
• 2 bolt caps
• 00% factory flush tested
❑
3191.016 Bowl
❑
4003.016 Tank
Nominal Dimensions:
724 x 457 x 778mm
(28-/2" x 8" x 30-5/8")
Fixture only, seat and supply by others
Alternate Tank Configurations Available:
❑
4003.500 Tank complete with Aquaguard Liner
❑
4003.800 Tank complete with trip lever located
on right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A2.9.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
To Be Specified:
❏ Color: ❏ White:
❏ Seat: American Standard #5324.09 "Rise and
Shine" solid plastic closed front seat with cover.
❏ Seat: American Standard #53.02 "Laurel"
molded closed front seat with cover.
❏ Alternate Seat:
❏ Supply with stop:
© 2008 AS America Inc.
COLONY™ FitRight™ RIGHT HEIGHT™
ELONGATED 12" ROUGH-IN TOILET
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (2") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A2.9.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
VITREOUS CHINA
08/08