室内装飾品 American Standard Lakeland 8193.140のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。American Standard Lakeland 8193.140 2 ページ。 American standard lakeland undercabinet storage rack installation instructions

ページを印刷する

LAKELAND™ UNDERCABINET STORAGE RACK

8193.140

Thank you for selecting American-Standard...the benchmark of fine quality

for over 100 years. To ensure that your installation proceeds smoothly--

please read these instructions carefully before you begin.

BEFORE YOU BEGIN:

• Carefully unpack your accessory, check the contents, and inspect carefully for damage.

• Mounting Kit Consists Of:

• 4 Clips

• 2 Long and 2 Short Metric Machine Screws

• 10 Flat and 4 Anti-shake (star) washers. Fig 4.

Note: The top of the rack is manufactured with a slope. When it is correctly installed under the sink the bottom

of the rack will be parallel with the rim of the sink.

IMPORTANT: DIMENSION OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN PERMITTED MANUFACTURING TOLERANCES.

• Locate the fixing screw holes on the underside of the sink.

• Make sure the threads are clear and mark around them. Fig 1.

Fig.1

• Put two clips on each of the top thick wires.

• Gently squeeze them closed.

• The exact location of the clips may vary depending on whether you want to position your storage rack

to the left or right. Fig 2 & 3.

Fig.2

™

Installation

Instructions

Fixing Screw

Hole Locations

RECOMMENDED TOOLS & MATERIALS:

• Phillips Screwdriver

• Regular Screwdriver (Small)

• Masking Tape or Yellow Crayon

Fig.3

• Pliers

• Tape Measure

• Flash Light

7 9 1 4 0 7 - 1 0 0