室内装飾品 American Standard Metering Faucets 6" Gooseneck Spout 1340.265のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。American Standard Metering Faucets 6" Gooseneck Spout 1340.265 3 ページ。 American standard center set faucets installation instructions
ページを印刷するMETERING
Center Set Faucets
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds
smoothly--please read these instructions carefully
before you begin.
TOOLS REQUIRED
Tubing Cutter
INSTALL FAUCET
CAUTION
Turn off hot and cold water supplies before beginning.
Apply a bead of PUTTY along the edge of the
underside of the FAUCET (1).
Insert faucet SHANKS through holes of SINK or
MOUNTING SURFACE.
Install GASKET (2), FRICTION WASHER (3), DEEP
WASHER (4) and LOCK NUT (5). onto SHANKS (6).
Tighten LOCK NUTS (5) firmly to secure FAUCET (1).
1
PUTTY
Installation
Instructions
1340.225
1340.255
1340.265
Channel Locks
SHANK
SINK OR
MOUNTING
SURFACE
2
3
4
5
1340.225
Adjustable Wrench
Plumbers' Putty or Caulking
MAKE WATER SUPPLY CONNECTIONS
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (1) or 3/8" O.D. BULL-NOSE RISERS (2).
Use adjustable wrench to tighten connections. Do not over
tighten. Be careful not to kink copper supply when bending.
Use tubing cutter to cut to proper length.
1
1340.255
1340.265
Certified to comply with ANSI A112.18.1
2.5mm Hex Wrench
COUPLING NUT
2
FERRULE
968493