- ページ 3

扇風機 Domus Ventilation CMX-MULTIのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Domus Ventilation CMX-MULTI 6 ページ。 Mechanical extract ventilation

3.0 CMX-MULTI/ CMX-MULTI-H: Physical

Specification

340

265

204

4.1

The following instructions are intended to help prevent hazards.

Installation should be only carried out by a qualified electrician and

competent person in clean, dry conditions where dust and humidity are

at minimum levels.

Note: we advise installers to fix all mains, switch and sensor wiring (in

accordance with the latest edition of the Wiring Regulations) prior to

fixing the CMX-MULTI / CMX-MULTI-H appliance in position.

4.2

When accepting delivery of the CMX-MULTI / CMX-MULTI-H

appliance, inspect for transit damage. If in doubt, call our Customer

Service team on 03443 715523

4.3

The CMX-MULTI / CMX-MULTI-H appliance can be fitted directly to

a ceiling, wall or suitable timber support (if loft mounting). It can also

be fitted within small ceiling voids and between joists above 400mm

spacing. Affix the unit to the chosen surface using appropriate fixing

method (see figure 2). The mounting holes on all four feet are

pre-drilled to suit 4 x 4mm (No.8) round/ pan-head screws.

LAB1356R | NoVEmBER 2018

4.4

Ensure that there is sufficient space for carrying out any future

maintenance on the appliance.

System should be configured in accordance with Ventilation schematic

provided by designer. Blanking caps are provided by Domus Ventilation

at purchase.

5.1

Domus Ventilation recommend securely connecting rigid ductwork to

the spigots using DDSEAL acrylic sealant (see figure 4). Failure to do this

will cause unnecessary air leakage and impair performance.

Important: ensure that direction of airflow travels from 'wet rooms' to

atmosphere (see figure 5).

PAGE 3