- ページ 5
扇風機 Domus Ventilation DX12FRのPDF インストレーション＆メンテナンス・マニュアルをオンラインで閲覧またはダウンロードできます。Domus Ventilation DX12FR 7 ページ。 Flat roof fan kit 50hz/60hz
ページを印刷する
Installation and Maintenance
DX Flat Roof Fan Kit 50Hz/60Hz
5.4 Fitting Integral Sensors (Optional)
6.4 Fitting Integral Sensors (Optional)
Note: Before following the pictorial sequence shown, first remove the
Note: Before following the pictorial sequence shown, first remove the
fans front cover grille (2 screws). Release the four main corner screws
fans front cover grille (2 screws). Release the four main corner screws
and lift out the motor/fan plate assembly. Remove the electrical cover
and lift out the motor/fan plate assembly. Remove the electrical cover
plate opposite the sensor plate. Follow the pictorial sequence on this
plate opposite the sensor plate. Follow the pictorial sequence on this
page.
page.
2
2
Remove the module plate.
Remove the module plate.
4
4
Plug the connector into the required sensor module.
Plug the connector into the required sensor module.
6
6
Push out the sensor area cover from the grille.
Push out the sensor area cover from the grille.
LAB1347R May 2018
1
1
Unscrew the module plate from motor plate assembly.
Unscrew the module plate from motor plate assembly.
3
3
Lift out the sensor module wiring connector.
Lift out the sensor module wiring connector.
5
5
Screw the sensor module into position.
Screw the sensor module into position.
7
7
Push the repacement cover into the grille front.
Push the repacement cover into the grille front.
V E N T I L A T I O N
Page 5