- ページ 2
バスタブ American Standard Evolution UL 1795のPDF 仕様書をオンラインで閲覧またはダウンロードできます。American Standard Evolution UL 1795 2 ページ。 Corner whirlpool, high gloss
ページを印刷する
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL
BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.
▲
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
OUTLINE OF
CUTOUT
(254mm)
15"
(381mm)
7"
5-5/8"
(178mm)
(143mm)
C/L OF
OVERFLOW
19-1/2"(C)
(495mm)
18"(A)
(457mm)
8"
(203mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
GENERAL SPECIFICATIONS FOR 6060V WHIRLPOOL
INSTALLED SIZE
76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP
E-Z INSTALL WHIRLPOOL HEATER
76-3/4"
(1949mm)
54-1/2"
(1384mm)
10"
(178mm)
CUT OUT
13-3/4"
IN FLOOR
(349mm)
FOR DRAIN
65-3/8"
(1661mm)
108 Lbs. (49 Kg.)
824 Lbs. (374 Kg.)
48 x 26-1/2 In. (1219 x 673mm)
63 x 50 In. (1600 x 1270mm)
24 Lbs./Sq.Ft. (116 Kgs./Sq.m)
2.1 HP, 14.4 AMPS,120V.
12.0 AMPS,120V.
H100
EVOLUTION™
CORNER WHIRLPOOL
65-3/8"
(1661mm)
3"
(76mm)
17-3/4"
7"
(451mm)
21-1/2"(H)
(546mm)
86 Gal. (325 L)
71 Gal. (269 L)
15 In. (381mm)
HIGH GLOSS
Revised 2/08