ページを印刷する
INSTRUCTIONS FOR OPENING AND REMOVING THE FILTERS
IMPORTANT:
·
Before removing any panel, make sure that the unit is not connected to the mains.
·
It is recommended to wear gloves when changing the filters.
·
Always pick the filters up by the frame. Never touch the filtering surface, in order to avoid
damaging it.
1- Take the unit down from the wall, lifting it slightly
to remove the hooks of the wall mounting bracket
from the unit.
3- To access the prefilter, remove the air inlet panel by
unscrewing the 6 corresponding bolts.
5- To access the absolute filter, remove the air outlet
panel by unscrewing the 6 corresponding bolts.
This panel presses on the perimeter of the filter to
ensure the required seal.
GRSYSTEM
PREFILTER
Motor
2 - Set it down horizontally on a stable surface and
locate the filters before doing anything.
4 - To access the GRSYSTEM, the prefilter must be
removed first.
Pure Air Residential 50
ABSOLUTE FILTER
| 11