デジタルカメラ Canon XF300のPDF 使用方法をオンラインで閲覧またはダウンロードできます。Canon XF300 2 ページ。 Canon xf300 professional camcorder
Canon XF300 にも：パンフレット (27 ページ), ユーザーマニュアル (2 ページ), 取扱説明書 (38 ページ), 使用方法 (2 ページ), 使用方法 (2 ページ), 仕様 (6 ページ), セットアップ＆トラブルシューティング手順 (2 ページ)

Canon XF Plugin for Final Cut Pro

Instructions

This plugin was created to allow you to easily transfer the clips you recorded using the camcorder to Apple's Final

Cut Pro non-linear editing system. This plugin is compatible with Apple's Final Cut Pro, version 6.0.3 or later*.

* As of March 2010, Final Cut Pro does not support clips recorded with the following video configurations:

50 Mbps (4:2:2), 1280x720, 25P;

Transferring clips directly from the camcorder or from a CF card

You can transfer clips to Final Cut Pro directly from a CF card inserted into a card reader connected to your

computer. You can also connect the camcorder to the computer using a USB cable to import clips directly from the

camcorder.

For details about transferring file-based media to Final Cut Pro, refer to Final Cut Pro User Manual.

Start up Final Cut Pro.

Connect the camcorder or the CF card to the computer.

• CF card: Connect a commercially available card reader compatible with CompactFlash memory cards to the

computer and insert the CF card into the card reader.

• Camcorder:

Power the camcorder using the compact power adapter.

Turn on the camcorder and set in MEDIA mode.

Connect the camcorder to the computer using a USB cable. Use the optional IFC-400PCU USB cable or

similar mini-B USB cable.

Click File > Log and Transfer to open the Log and Transfer window.

Choose a destination codec for the transferred clips.

Select Preferences in the Browse area of the Log and Transfer window and select the target format (the format

for transcoding) Canon XF MPEG-2 files.

Add the desired clips to the Transfer Queue.

• To add only part of a clip: Select the desired clip from the Browse area, set the In point and Out point as

necessary in the Preview area and click the Add Clip to Queue button.

To add multiple clips: Select the desired clips in the Browse area and click Add Selection to Queue.

• The clips in the Transfer Queue will be transferred automatically and saved with the latest project.

Close the Log and Transfer window.

Drag the icon of the CF card in the card reader or the icon of the camcorder to the trash can icon to safely

eject the media and then disconnect the card reader or camcorder.

50 Mbps (4:2:2), 1280x720, 24P.

Macintosh

Version 1.0

50 Mbps (4:2:2), 1280x720, 30P;