- ページ 6

投影スクリーン Da-Lite ParallaxのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Da-Lite Parallax 8 ページ。

Installation

There are three methods of installation based on the size of the

screen. Measure the width of the viewing area of your screen

and refer to the appropriate method of installation below. The

wall bracket diagram shows the type and quantity of bracket(s)

supplied based on the size of the screen.

Installation Method 1 (Screens 80" And Smaller In Viewing Width)

1. Secure the wall bracket to wall studs at the desired height.

Make sure the bracket is level. The top of the frame will be

1/8" above the top of the wall bracket when mounted. You will

need at least 5/8" clearance above the bracket to hang the

screen. Figures 5, 6, and 7 show the proper orientation for the

supplied wall brackets.

2. To install the lower wall bracket, you must measure the

overall height of the screen frame and subtract 1-5/8". Using

that dimension, measure down from the top edge of the wall

bracket and mark the wall for two screw holes. The holes

should be centered within the frame and 6" apart. Refer to

Figure 6.

3. Attach the small wall bracket to the wall. Refer to Figure 7 for

proper orientation. Do not tighten the screws completely. The

bracket should slide up and down easily.

4. Position the screen with the attached surface onto the top

wall bracket. Push down at the center

of the bottom frame rail to hook onto the lower wall bracket.

Refer to Figure 7.

Overall

Height

Overall Height Less 1 5/8"

Figure 6

Large Wall Bracket

Small Wall Bracket

Method 1: Screens 80" and smaller in viewing width.

Method 2: Screens over 80" up to 96" in viewing width.

Method 3: Screens over 96" in viewing width.

Figure 5

Lift

Figure 7

Large Wall

Bracket

1-Piece

Small Wall Bracket

1-Piece