- ページ 9

投影スクリーン Da-Lite Polacoat Da-Plex Semi-RigidのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Da-Lite Polacoat Da-Plex Semi-Rigid 12 ページ。

Installation (continued)

17. Raise the screen assembly into the wall opening. On the

projector side, one person will remain holding all three ropes

without slack, guiding the screen into place. On the audience

side, two people will lift the screen vertically, one on the left

and one on the right side. These three people (one rope

control and two lifters) will coordinate together to lift the

screen into place. The fourth person should be on a ladder on

the projector side helping the rope control and lifters guide

the screen assembly into place until all three hoisting and

lifting brackets attach to each other at the top of the wall

opening (See Figure 8).

NOTE: During this step, be careful not to touch the projection

coating on the audience facing side of the screen assembly

along the screen edges.

NOTE: At the end of this step, the screen assembly's weight

should be supported by the hoisting and lifting brackets and

it should be inside of the wall opening.

T-Track

Screen Assembly

(Audience Side)

Figure 8

2⅛"

Hoisting

Bracket

Lifting Bracket