- ページ 7
投影スクリーン Da-Lite Senior ElectrolのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Da-Lite Senior Electrol 8 ページ。
Da-Lite Senior Electrol にも： 取扱説明書 (8 ページ), 取扱説明書 (8 ページ)
ページを印刷する
TROUBLESHOOTING
SYMPTOM
3. Screen will not move "up."
Motor does not hum.
Motor hums.
4. Scraping or grinding noise.
5. Gear noise.
6. Fabric rubbing.
7 . Incorrect stopping point in
upward position.
8. Incorrect stopping point in
downward direction.
CAUSE
(a) Blown fuse or tripped circuit
breaker.
(b) No power between red and white
leads in junction box.
(c) Thermal overload tripped.
(d) Burned out motor winding.
(e) Temporary binding.
(f) Burned out capacitor.
(g) Broken wire or loose connection
in "up" position circuit.
(a) If metal shipping bracket is left at-
tached to screen, it may be rub-
bing on motor end of roller.
(a) Gear may need lubrication.
(a) Normal condition.
NOTE: Screens with ironing boards
have fabric that drags across the
board.
(a) Lost roller wrap.
(b) Limit switch out of adjustment.
(a) Lost roller wrap.
(b) Limit switch out of adjustment.
6
SOLUTION
(a) Replace fuse or reset circuit
breaker.
(b) Correct improper wiring.
(c) Let motor cool for 15 minutes. Try
again.
(d) Check for power between red
and white motor leads. Replace
motor if there is power.
(e) With power off, turn roller by
hand to free binding.
(f) Replace capacitor.
(g) Secure connection or replace
wire.
(a) Remove shipping bracket.
(a) Apply grease.
(a) Lift bottom edge up and over
roller.
(b) See installation instructions.
(a) See above.
(b) See installation instructions.