- ページ 5

オール・イン・ワン・プリンター Canon 7158A043 - ImageCLASS 2300 B/W LaserのPDF セットアップをオンラインで閲覧またはダウンロードできます。Canon 7158A043 - ImageCLASS 2300 B/W Laser 8 ページ。 Canon imageclass 2300: install guide

ページを印刷する

Load paper.

1 Pull out the paper drawer until it stops.

NOTE

You can skip steps 3, 6 and 7 if you are loading letter size paper in the portrait orientation (LTR

Note that some paper sizes have both portrait (

3 Detach the blue end guide by

moving it down to the left then

pulling up, and attach it again at

the mark for the desired paper size.

8 Load the paper into the drawer. Make sure

the paper size setting of the drawer

matches the size of the paper.

10 Push the paper drawer back into the machine. Repeat the steps above for the bottom drawer

as well.

2 Remove the black wire 1 and shipping tag,

and the orange tape 2.

) and landscape ( ) settings.

4 Insert the paper size notice card in the

card slot located on the inside front of the

drawer.

5 Attach the appropriate paper size label

to the paper size plate, and insert the

LTR

plate in the slot at the drawer front.

6 Lift up the blue lock lever and slide the

Unlock

side guide to match the size of the paper

you are loading. Lower the lever again to

Lock

lock the side guide.

7 Set the paper size detector lever to match

the size of the paper you are loading.

9 Even out the edges of the paper stack.

Make sure the height of the paper stack

does not exceed the limit mark