- ページ 3

録音機器 DAAB DB409のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DAAB DB409 12 ページ。 Interface card for frequency converter vfd-el

DAAB INTERFACE CARD DB409 INSTRUCTION MANUAL

Installation EP105

1. Disconnect power to EP105

2. Screw the DB409 card into place on the spacers on the EP105 using two M3x5 screws..

Preparations before connection

NOTE! Take care to ensure that all cables marked as illustrated below are removed. If this is not done correctly, the

frequency converter and the automatic control unit may be permanently damaged.

Pick out the following:

EP105-1

The cable in X12

The illustration shows EP105 -2

Connection

The frequency converter being connected to the DB409 must be a DELTA VFD-EL. This frequency converter is based on

negative logic. Refer to the following pages for full details regarding signals and connecting electric motors.

Revision 7

Spacers for DB409

EP105-2

The cable in X12

The cable in X7

The cables between X4 and X11

The cable in X7 is removed

The cable is removed

The cable in X12 is removed