- ページ 7

医療機器 Daavlin DT Home-ControlのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Daavlin DT Home-Control 19 ページ。 Modes of operation - timed mode

•

All treatments must be administered under the direction of a licensed physician only.

•

Device is not to be used in MR environments that may include MRI, diathermy, electrocautery,

or other high frequency equipment.

•

Do not treat if the lamps fail to ignite. Consult with doctor and/or contact Daavlin customer

service. (See page 21)

•

If lamps turn on without treatment being started/resumed, or if lamps do not turn off when

treatment is completed, unplug the device. Contact doctor and/or Daavlin customer service.

(See page 21)

•

Phototherapy Devices are considered CISPR Group 1, Class A devices, to be

Controlled

used for prescription use only.

8.0 Operating Specifications

Ambient

Temperature:

Relative Humidity:

Liquid Ingress

Rating:

Ocular Hazard

Distance:

Ambient

Luminance:

WARNING: Equipment not suitable for use in the presence of a flammable anesthetic mixture

with air or with oxygen or nitrous oxide.

If the unit is equipped with FlexRx™ exposure limiting software, there will be a label similar to the

one shown below (Figure 1 FlexRx Label) below informing you that your unit has been equipped

with this feature.

MNL-00049 [1]

15°C to 30°C (59°F to 86°F)

10% to 95%, Non-condensing

IPX0 (This device does not have protection

against ingress of water.)

3 Meters (9.84 Feet)

250 – 500 lux

Figure 1 FlexRx Label

Proprietary and Confidential. Printed copies will not be updated.

Page 7 of 19