- ページ 9

ホットタブ American Standard EVOLUTION 7236V.068CのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。American Standard EVOLUTION 7236V.068C 14 ページ。 Air baths

AIR BATH ELECTRICAL INSTALLATION INSTRUCTIONS

All wiring must be performed by a licensed electrician in accordance with the national electrical code and all other applicable codes.

WARNING: When using electrical products, basic precautions should always be observed, including the following:

1. DANGER: RISK OF ELECTRIC SHOCK! Connect only to a circuit protected by a ground-fault circuit interrupter.

2. Permit access for servicing blower as noted.

3. All building materials and wiring should be routed away from the air blower.

PLEASE SEE THE FOLLOWING TABLE FOR GFCI CIRCUIT REQUIREMENTS:

GFCI CIRCUIT REQUIREMENTS:

The air bath should be installed on a 120 vac,

dedicated GFCI circuit.

The circuit should be hard-wired from the electrical power supply panel. The

circuit must be a three (3) wire circuit from the electrical supply panel. A

grounded neutral wire and a third wire, earth ground, are essential.

120V, 60HZ

ELECTRICAL

FEED

15A GFCI

GFCI

ELECTRONIC ACTIVATED AIR BATH (4 BUTTON PANEL)

amp

FOR MODEL NUMBERS:

2425L / V.168C-RHO

2422L / V.068C

2425L / V.268C-LHO

2645L / V.068C

2771L / V.068C

7236L / V.068C

754072-100 Rev. A