- ページ 2

カラオケシステム eKids 553 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。eKids 553 Series 2 ページ。 Bluetooth mp3 karaoke with 2 microphones

eKids 553 Series ユーザーマニュアル
Getting Started
There are three ways to listen to music with this unit:
• In USB Mode you can connect a flash drive to the unit and
listen to your stored songs.
• In MP3 Mode you can transfer music from your computer to the
unit via the micro USB Data Transfer port. The music will save
to internal memory and you can listen to it directly from the unit
itself.
• In Bluetooth Mode you can stream music from your smartphone
or other Bluetooth device.
Note: When using USB Mode or Internal Memory Mode, this
unit is compatible with .mp3 and .wav files ONLY.
This unit ships in Demo Mode for in-store demonstration
purposes. Slide the Mode Switch to USB, MP3, or Bluetooth
Mode to exit Demo Mode.
Charging The Unit
1. Connect the included micro USB cord to the micro USB
charging port on the back of the unit.
2. Connect the standard USB plug end of the cord to a power
USB port on a computer or other USB charging device.
For first time use, charge unit for about 5 hours.
Charge via USB AC adaptor, computer USB port, or other powered USB port
USB Adaptor
(not included)
when empty
battery icon
OR
Computer connected
to working outlet
Computer USB port
Using USB Mode
Make sure the Mode Switch is set to USB.
• When the unit is OFF, connect a USB flash drive to the USB
port on the back of the unit.
• Press the Power Button to turn the unit ON. The "USB" icon will
show on the top left of the display.
• When a USB drive is detected, the number of files on the USB
drive will appear on the LCD display.
• Press Play, then use the "Forward" and "Reverse" buttons to
advance through the numbers of files on the USB drive.
• Pressing "Play" will change the display to show a countdown
time of the selected song file. After pressing "Play", the
automatic play-all function will activate, and songs will play in
the order they were stored. Press again to pause.
DISPLAY ICONS
Bluetooth
Battery
Mode
Level
MP3
Mode
Microphone
USB
ON/OFF
Mode
Volume Up
Volume
Down
Recharge
flashes
Power
ON/OFF
Light
Modes
BACK OF UNIT
Reset
Bluetooth
Mic
Mic 1
Mic 2
Pairing
Volume
Jack
Jack
Inside the compartment:
USB port
(for USB Mode)
LCD
Display
Reverse
Forward
USING THE MICROPHONES
Microphone
On/Echo/Off
Play/Pause/
Shuffle
• Connect the microphones to
Mic Jack 1 + 2 on the back of
the unit.
• Press the Microphone
ON/ECHO/OFF Button to turn
the Mic ON and amplify your
voice when you sing.
- Press again to add an
'echo effect' to your voice.
- Press again to turn the
Mic OFF.
• Control mic volume using the
rotary dial on the back of the
unit.
Using MP3 Mode
Mode Switch
Make sure the Mode Switch is set to MP3 Mode and your USB
flash drive is disconnected from the unit.
Storing Songs:
• Turn the unit ON, connect the micro USB cord to the Data
Transfer port on the back of the unit. Connect the other end to
a USB port on your computer.
• The unit should show up on your PC or Mac as a 'drive' or
USB Charging/
'device'.
Data Transfer
• Locate your music files on your PC or Mac (typically in the 'My
Music' folder). Note: on some computers, your music files may
be located elsewhere. Check your user manual for details.
• Select your desired songs ( .mp3 and .wav files are
compatible) and drag them onto the connected drive.
When you are finished transferring files, 'eject' the device from
your computer and disconnect the USB from the unit.
Playing Songs:
• The LCD display on the unit will show the number of songs
stored. (ex: 100 songs would appear as "01:00").
• Use the "Forward" and "Reverse" buttons to advance through
the numbers of files stored on the unit.
• After pressing "Play", the automatic play-all function will
activate, and songs will play in the order they were stored.
Using Play/Pause/Shuffle
Press and hold to shuffle songs while playing music in USB Mode
or MP3 Mode. 'SHU on' will flash on the display. Press and hold to
disable shuffle. 'SHU off' will flash on the display.
Converting Files to MP3
iTunes music files are saved by default in .m4a format, and must
be converted to .mp3 format to play on the unit in MP3 mode.
Check the Help section in iTunes (or other music software
program) to learn how to convert to .mp3 format.
Using Bluetooth Mode
• Select the "Bluetooth" position on the Mode Switch. The
Bluetooth Mode icon will appear and 'bt' will flash on the LCD
display while in pairing mode. Turn on your Bluetooth device
and make it "discoverable" by turning on Bluetooth mode
(check in Options or Settings).
• "BT-553" should appear in your device's Bluetooth menu. If
"Not Connected" or a similar message appears, select
"BT-553" to connect it.
• A voice prompt will confirm once your device is paired. Put
your Bluetooth device in play mode to begin streaming music.
• Use the "Forward" "Reverse" and "Play/Pause" buttons on the
unit to navigate tracks.
• Pairing automatically occurs in Bluetooth mode. Press the
Bluetooth Pairing button on the back of the unit to re-pair.