- ページ 2

カラオケシステム eKids JJ-673のPDF マニュアルをオンラインで閲覧またはダウンロードできます。eKids JJ-673 2 ページ。 Bluetooth + cd+g karaoke
eKids JJ-673 にも：クイック・スタート・マニュアル (2 ページ)

ページを印刷する

673 IB_Back side Size: 357 x 201 mm Color: Black

Using the Microphone

Connect the included microphones to the two input jacks (26) on

the unit. Turn on the unit and choose Bluetooth, AUX, or CDG

modes using the Mode Button (6).

1. Slide the switch on the Microphone to ON. Now you can sing

along to your favorite music in either CD, Bluetooth, or AUX

modes, and hear your voice through the speaker!

2. When not in use, slide the Microphone switch to OFF. Unlock

the removable slots on the side of the unit to store your

microphone, as shown in the image on the right.

CDG Mode

This unit plays CD, CDR, and CDG formats. To play a CD or

CDR, turn on the unit and set the Mode Selector (6) to CDG.

• Open the disc compartment on the top of the unit and insert

the disc face up. Close the compartment door.

• Use the controls to play/pause (11), stop (10).or navigate

tracks (8,12).

To play a CDG disc on your television:

• Connect the included RCA cable (white and red connectors)

to the RCA audio output jacks located at rear of the unit (27).

• Connect the other end of the audio cable to the RCA audio

input jack of a TV set.

• Connect the RCA video cable (yellow connector) to the RCA

video output jack located at rear of the unit (27).

• Connect the other end of the video cable to the RCA video

input jack of a TV set, and make sure your television is set to

the corresponding input.

• Turn on the unit and set the Mode Selector (6) to CDG.

• Insert a CDG disc into the unit and press the Play/Pause

Button (11). Now you can follow the lyrics on the screen and

sing along through the microphone!

• Use the Previous Track (8) and Next Track (12) buttons to

navigate tracks on the CDG.

Repeat/Program Buttons

To repeat a track on your CD, press the Repeat Button (16) on

the unit. The "Repeat" LED Indicator will blink. Press again, the

"repeat" LED indicator will glow solid, and the unit will repeat all

tracks. Press again to cancel the 'repeat all' program.

You can also program up to 20 tracks of the CD in a desired

order. With CD playback stopped, press the Program Button

(15) once.The "PROG" LED indicator blinks, and the LED

display shows the program number.

Press the Previous Track (8) and Next Track (12) Buttons to

select a track number. When the desired track number is

displayed, press the Program Button to confirm entry.

Repeat these steps until all desired tracks are entered. To begin

programmed playback, press the Play/Pause Button (11). To

cancel programmed playback, press the STOP button twice.

1. Wake Button

8. Previous Track Button

2. Light Button

9. LED Display

3. LED Power Indicator

10. Stop Button

4. Power ON/OFF

11. Play/Pause Button

5. Echo Effect Rotary

12.

Next Track Button

6. Mode Button: CDG/BT/AUX

13.

Master Volume Rotary

7. Mic Volume Rotary

14.

Auto Voice Control

WAKE

CDG

REPEAT

ECHO

REPEAT

LIGHT

PROG

PLAY/PAUSE

MODE

CDG

PROG

MAX

MIN

AUX

10 11

MAX

MIN

Vocal Effects

Use the Auto Voice Control (14) or the Echo Effect (5) to

add vocal effects while you sing! Make sure your

microphone is connected to the unit and the microphone

switch is turned ON.

Auto Voice Control Dial (For Multiplex CDG discs only):

When playing a Multiplex recording, spin the dial to

replace the lead singer's voice with your own!

Echo Effect Rotary Dial:

Spin the dial as you sing to add an echo effect to your

voice!

15.

Program Button

21. Mode Indicator

22. Microphones

16.

Repeat Button

23. Microphone ON/OFF

17.

Speakerphone/Voice

24. Light Show LEDs

Control Microphone

25. Speaker

18. Voice Control Button

26. Microphone Jacks

19. Bluetooth Pairing Button

27. RCA Audio/Video Jack

20. CD Compartment

28. AUX-IN Jack

29. DC Power Jack

30. Phone Stand - Not

Recommended for Use

with Tablets

Using The Light Button:

A.V.C

By default, the unit will

MAX

display a repeating light

MIN

pattern when no music is

playing. When music plays,

the unit will activate 'beat

MAX

detection', and lights will

pulse along to music.

• Press to turn off speaker

lights.

• Press again to return to

default setting.

Back of Unit

AUX Mode

This unit has an AUX-IN jack, through this jack other audio

sources (MP3 players, etc) can be connected to this unit and

be amplified.

1. Turn on the unit and set the Mode Button to AUX. "AU" will

glow solid on the LED screen.

2. Connect one end of a 3.5mm audio cable (not included)

into the AUX-IN jack and the other end to the headphone

jack of your audio device.

3. Press PLAY on your audio device to start playback.

Control/navigate tracks from your audio device, too.

Pairing Your Device Via Bluetooth

Make sure your Bluetooth device is fully charged. Turn on your

Bluetooth device and turn on Bluetooth mode (check in

Options or Settings).

• Turn on the unit and set the Mode Button (6) to BT mode.

Press the Bluetooth Pairing Button (19). A tone will sound

and the LED screen will flash 'bt' as the speaker enters

pairing mode.

• "Karaoke 673" should appear on your device's screen. If "Not

Connected" or similar message appears, select

"Karaoke 673" to connect. If your device asks for a passcode,

enter '1234'.

• Once paired, a confirmation tone will sound and 'bt" will glow

solid on the LED screen. Put your Bluetooth device in Play

mode to stream audio to the speaker. Use your Bluetooth

device OR the Play/Pause, Previous Track, and Next Track

buttons on the unit to control audio functions.

Voice Control Button / Voice Control App

When the unit is in BT mode, you can access Siri or Google

Assistant using voice commands by pressing and holding the

Voice Control Button. This special feature is disabled on the

unit when shipped, and requires parental consent to be

activated. To start the one-time activation process, download the

free "Voice Control Set Up" app on your smartphone using the

App Store or Google Play. Once downloaded and installed on your

smartphone, the app will provide prompts to help you set up the

Voice Control function.

Speakerphone

When connected via Bluetooth, you can answer and end phone

calls. This function is active when the unit is in BT mode.

1. When your smartphone receives an incoming call, you will

hear it ring through the speaker. Press the Bluetooth Pairing

Button(19) to accept the call, and speak into the

Speakerphone/ Voice Control Microphone (17).

2. To end the call, press the Bluetooth Pairing Button(19) again.

Melody App

The Voice Control Button can also be used to activate Melody,

which lets you use voice commands to play any music from

iHeartRadio* or Spotify* To use this feature:

• Download the Melody app on your smartphone using the

App Store or Google Play.

• Open the app and sign into your iHeartRadio and/or Spotify

account within the Melody app.

• With the unit in BT mode, tap the Voice Control Button (18) to

activate the Melody app via your paired smartphone. (See

Voice Control App instructions above to activate Voice

Control on the unit.)

• Once you hear a confirmation tone, speak into the Voice

Control Microphone (17) to make your voice commands.

• If music is playing, tap the Voice Control Button (18) once to

Pause. After you hear a confirmation tone, speak into the

Voice Control Microphone (17) to make your new voice

commands.

*iHeartRadio not available in Canada

*Spotify Premium account required