- ページ 5

オール・イン・ワン・プリンター Canon ImageCLASS 2300のPDF セットアップシートをオンラインで閲覧またはダウンロードできます。Canon ImageCLASS 2300 9 ページ。 Digital multifunction imaging system
Canon ImageCLASS 2300 にも：仕様 (2 ページ), セットアップ (8 ページ), リモートUiマニュアル (44 ページ), 仕様 (2 ページ)

ページを印刷する

5 Connect the USB cable to the

USB port on the back of the

machine. Connect the other

end of the cable to the USB

port on your computer, and

turn ON the machine's main

power.

6 When the printer driver is installed, remove the Driver

Software CD-ROM from the CD-ROM drive. Select [Yes, I want

to restart my computer now.] and click [Exit] to restart your

computer.

7 If you want to install the fax driver, proceed to

To Use the Machine as a Network Printer

Specifying the Network Settings

IMPORTANT

The machine needs to be restarted for the specified settings to become effective. To restart the machine, simply turn the

power OFF, wait for at least 10 seconds, and turn the power ON again.

NOTE

For details on specifying network settings, see Chapter 2,"Using a TCP/IP Network (Windows/UNIX)," in the Network

Guide, and Chapter 2,"Setting the Network," in the Sending Guide.

For additional network protocol settings, see the Network Guide.

For details on how to input characters, see Chapter 2,"Basic Operations," in the Reference Guide.

For the values of the network settings, consult your network administrator or internet service provider (ISP).

1 Print the printer configuration page:

a. Press [PRINT]

b. Press [F1] until <TEST MENU> appears.

c. Press [F2] until <PRINT EN CONFIG> appears.

d. Press [F4] to print out the configuration page.

e. If the IP address is correct, proceed to Installing the Printer Driver Software on the next page.

➝

[OK] to take the machine offline.

USB port