- ページ 5

調光器 Ekinex EK-GH1-DLのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Ekinex EK-GH1-DL 6 ページ。 Dali 1-channel dimmer

ページを印刷する

Local commands

Available functions:

N.O. pushbutton with memory / N.O. pushbutton without memory.

Light dimming by following the selected regulation

curve and by keeping the color temperature constant.

Soft start with 200ms fade time. Soft switch-off with

a fade time of 1s.

•

Available functions: 0-10V / 1-10V / potentiometer.

Light dimming by following the selected regulation

curve and by keeping the color temperature constant.

Min. intensity = 0,1%

•

Dimensions [mm]

Click: Switch ON / OFF

Double Click: max. intensity (100%)

Long press (>1s) while OFF: switch ON at 1%

(Night function)

Long press (>1s) while ON: Dimming UP /

DOWN

< 1 V: load OFF

10 V: max. intensity

Marks

• CE: the device complies with the Electromagnetic

Compatibility Directive (2014/30/EU) and the RoHS 2

Directive (2011/65/UE).

• Reference

61347-1:2008+A1:2011+A2:2013,

3.2, EN 61000:2013-3.3, EN 62384:2006+A1:2009,

EN 55015:2013+A1:2015 , EN 61547:2009, EN

50581:2012

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classified

as waste from electronic equipment in

accordance with the European Directive

2012/19/EU (WEEE recast), and cannot

be disposed together with the municipal

undifferentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out by

qualified personnel in compliance with the applicable

technical standards and laws of the respective countri-

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certified, is no longer guaranteed

Standards:

61000:2014-