コントロールユニット Ekinex EK-EA2-TPのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Ekinex EK-EA2-TP 4 ページ。 4-fold pushbutton
4-fold pushbutton
Product code: EK-EA2-TP
S
TP1
KNX device for switching and control of single loads or
groups of loads. It has to be used in KNX installations for
control of homes and buildings.
Description
The ekinex
4-fold pushbutton (max 8 functions) is a S-
®
mode KNX device for on/off switching of loads, dimming
of lighting devices, controlling of motor drives or other pro-
grammable switching and control functions. It is equipped
with an integrated KNX bus communication module and is
designed for wall installation on flush mounting box. The
device has two LEDs for each channel programmable for
example as a status signal or orientation nightlight. The
pushbutton has to be completed with four rockers and a
frame that must be ordered separately. Pushing a rocker,
the device sends on the bus a telegram, which is received
and executed by one or more KNX actuators. The device
is powered by the KNX bus line with a SELV voltage 30
Vdc and does not require auxiliary power.
i
Note. Rockers and frame for the completion of the
device must be ordered separately. For more infor-
mation on materials, colors and finishes available,
see also the ekinex
www.ekinex.com
Main functional characteristics
• On/off switching of single loads or groups of loads
• Dimming of lighting devices
• Control of motor drives (for roller shutters, blinds, cur-
tains, etc.)
• Recalling and saving of scenes
• Sending on the bus of values (temperature, bright-
ness, etc.)
• Switching to forced functioning (lock)
• Measuring of room temperature and light brightness
through integrated sensors
• Different functions programmable for short pressure /
long pressure of a rocker
• Status feedback or orientation nightlight through 2-co-
lor programmable LEDs
Datasheet STEKEA2TP_EN
product catalog or browse
®
Other characteristics
• Housing in plastic material
• Wall installation in flush mounting box
• Protection degree IP20 (according to EN 60529)
• Classification climatic 3K5 and mechanical 3M2 (accor-
ding to EN 50491-2)
• Pollution degree 2 (according to IEC 60664-1)
• Weight 40 g (55 g with mounting support)
• Dimensions 82 x 75 x 35 mm (WxHxD)
Technical data
• Power supply 30 Vdc from KNX bus line
• Current consumption < 15 mA
• Power from bus < 360 mW
Environmental conditions
• Operating temperature: - 5 ... + 45°C
• Storage temperature: - 25 ... + 55°C
• Transport temperature: - 25 ... + 70°C
• Relative humidity: 95% not condensing
Completion of the pushbutton
For installation and operation an ekinex
be completed with a separate order of:
• operation elements consisting of four square or rectan-
gular rockers;
• one square frame of the ekinex
The metallic support, the fixing screws (two pairs), the
protection for construction site and the KNX terminal
block for connection of the bus line are supplied with the
device.
1
2
1) Pushbutton with rectangular rockers and square frame of flank series
2) Pushbutton with square rockers and square frame of form series
Three-positions rockers with central neutral position have
to be mounted on the pushbutton. Pushing one side of
a rocker (for example the upper one), the pushbutton
sends on the bus a telegram for switching on, increasing
the brightness of luminaires or raising the blinds, while
pushing the other side (for example the lower one), it sen-
ds a telegram for switching off, reducing the brightness of
luminaires or lowering the blinds. Each channel is equip-
ped with LEDs which can be freely programmed as status
feedbacks of the loads and as orientation nightlight.
1
pushbutton must
®
form or flank series.
®