スイッチ Ekinex EK-E12-TP-BG-NFWのPDF データシートをオンラインで閲覧またはダウンロードできます。Ekinex EK-E12-TP-BG-NFW 5 ページ。 Pushbutton
Ekinex EK-E12-TP-BG-NFW にも：クイック・スタート・マニュアル (9 ページ)

ページを印刷する

Pushbutton 71 Serie

Code: EK-E12-TP-...

TP1

KNX device for switching and control of single loads or

groups of loads and room temperature regulation. It has

to be used in KNX installations for control of homes and

buildings.

Description

The ekinex

pushbutton of 71 Serie is a KNX S-mode de-

vice for on/oﬀ switching of loads, dimming of lighting de-

vices, controlling of motor drives or other programmable

switching and control functions. The integrated tempera-

ture sensor allows the use as a room or zone temperature

controller. It is equipped with an integrated KNX bus com-

munication module and is designed for wall installation

on ﬂ ush-mounting box. Each channel can be freely con-

ﬁ gured to carry out 1 or 2 bus functions and is provided

with

programmable LED (blue/green or red/white) e.g.

as a staus feedback or orientation nightlight. Pressing a

rocker, the device sends on the bus a telegram, which

is received and executed by one or more KNX actuators

depending on the conﬁ guration carried out. The device is

and does not require auxiliary power.

Versions

Device code

LED colours

EK-E12-TP

blue / green

EK-E12-TP-RW

red / white

EK-E12-TP-BG-NF

blue / green

EK-E12-TP-RW-NF

red / white

EK-E12-TP-BG-NFW

blue / green

EK-E12-TP-RW-NFW

red / white

Note. The set of rockers, the plate and the optional

frame for completing the device must be ordered

separately. For more information, see also the eki-

nex

product catalog or browse www.ekinex.com

Datasheet STEKE12TP_EN

Mounting

with frame of the

form or ﬂ ank series

without frame ('NF series)

with white adapter

Main functional characteristics

• On/oﬀ switching of single loads or groups of loads

• Dimming of lighting devices

• Control of motor drives (for roller shutters, blinds, cur-

tains, etc.)

• Room temperature regulation

• Logic functions

• Sending on the bus of values (temperature, bright-

ness, etc.)

• Switching to forced functioning (lock)

• Recalling and saving of scenes

• Measuring of room temperature and light brightness

through integrated sensors

• Diﬀ erent functions programmable for short pressure /

long pressure of a rocker

• Status feedback or orientation nightlight through 2-co-

lour programmable LEDs

Other characteristics

• Housing in plastic material

• Wall installation in ﬂ ush mounting box

• Protection degree IP20 (according to EN 60529)

• Classiﬁ cation climatic 3K5 and mechanical 3M2 (accor-

ding to EN 50491-2)

• Pollution degree 2 (according to IEC 60664-1)

• Weight 40 g (70 g with mounting support)

• Dimensions 81 x 77 x 21 mm (WxHxD)

Technical data

• Power supply 30 Vdc from KNX bus line

• Current consumption < 15 mA

• Power from bus < 360 mW

Environmental conditions

• Operating temperature: - 5 ... + 45°C

• Storage temperature: - 25 ... + 55°C

• Transport temperature: - 25 ... + 70°C

• Relative humidity: 95% not condensing

Delivery

The delivery of the pushbutton includes a metallic support

for round ﬂ ush-mounting box, the ﬁ xing screws (2 pairs)

and the KNX terminal block for connection of the bus line.

Device completed with square

plate, 1-fold Form frame and set of

rockers EK-T1Q-...

Device completed with square

plate, 1-fold Form frame and set of

rockers EK-T4Q-...

Device completed with square

plate, 1-fold Form frame and set of

rockers EK-T2R-...

Device completed with square

plate, 1-fold Form frame and set of

rockers EK-T4R-...