- ページ 16
オーブン Astivita ASTPYROV60のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Astivita ASTPYROV60 19 ページ。
Automatic cleaning with the .AST
CLEAN function
With the .AST CLEAN mode, the internal
temperature of the oven reaches 500°C. The
pyrolytic cycle is activated, burning away food and
grime residues. Dirt is literally incinerated.
Keep children away from the appliance during the
automatic cleaning cycle as surfaces may become
very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for
concern: this process is both normal and hazard-
free.
Before initiating the .AST CLEAN mode:
Remove large or coarse food residues from the
inside of the oven using a damp sponge. Do not use
detergents.
Remove all accessories.
Remove the DIVIDER.
Do not place tea towels or pot holders over the
oven handle.
If the oven is too hot, the pyrolytic cycle may not
start. Wait for the oven to cool down.
The programme may only be started once the oven
door has been closed.
To enable the .AST CLEAN cycle, turn the
EXTRALARGE SPACE .UNCTION knob to
Press the
button. The TIMER KNOB may be
used to select the desired cleaning level; there are
three default time settings which cannot be
modified.
1. Economy (ECO): turn the knob towards -.
Duration 1 hour.
2. Normal (NOR): initial level. Duration 1 hour and 30
minutes.
3. Intensive (INT): turn the knob towards +.
Duration 2 hours.
4. Press the
button to confirm.
An end time for the .AST CLEAN cycle (as for a
normal cooking cycle) may be programmed (see
Programming the automatic cleaning end time).
16
Safety devices
The
icon on the display, when lit, indicates
that the oven door was automatically locked as soon
as the temperature reached a high value.
If a malfunction occurs, the heating elements will
be switched off.
Once the oven door has been locked, you cannot
change the duration and cycle end time settings.
Programming the automatic cleaning end time
1. Press the
digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards + and - to
adjust the hour value.
3. Press the
digits on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards + and - to
adjust the minute value.
5. Press the
6. When the set time has elapsed, the text END
appears on the display and a buzzer sounds.
.or example: it is 9:00 a.m. and the Economy
(ECO) .AST CLEAN level has been selected, with
the default duration of 1 hour. 12:30 is scheduled as
the end time. The programme will start automatically
at 11:30 a.m.
Programming has been set when the
buttons are illuminated. The display shows the .AST
CLEAN end time and duration alternately.
.
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the
oven has cooled down sufficiently before you can
open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven;
remove these deposits with a damp sponge once
the oven has cooled down completely. Alternatively,
you can make use of the already heated oven, in
which case it is not necessary to remove the
deposits, they are completely harmless and will not
affect your food in any way.
button until the
icon and the two
button again until the other two
button again to confirm.
and
G B