- ページ 2

屋外ライト Donner & Blitzen 0-02661479-2のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Donner & Blitzen 0-02661479-2 2 ページ。 5ft silver sparkle lamp post

ページを印刷する

ASSEMBLY INSTRUCTIONS

THIS LAMP POST IS FOR INDOOR USE ONLY!

Retain carton and instruction sheet for storage and further purposes.

Each carton contains two lamp post sections and one resin pot.

1. Choose a location where the lamp post is to be displayed.It should be on a level surface.

Make sure final assembly stable enough to hold the lamp post upright.

2. Take out the two lamp post sections and resin pot from carton and assemble.

Position the pot first,insert the bottom section pole into the pot base,

then insert the lamp post top into the bottom section pole as Figure 1 shown.

3. Shape your lamp post's greeneries as Figure 2.Working your way up from the

bottom.The lamp post is easy to set up in a short time.

Figure 2

4. You can add holiday decorations to beautify this lamp post.

5. The lamp post is pre-strung and has powered tree pole. The adaptor has assembled

with wire connector. You can connect the adaptor to the wall outlet directly without

extra light connection. All lights should illuminate completing the assembly of your tree!

Enjoy your holiday!

Please note this tree is LYTE SYSTEM

Electrical Rating For the Lamp Post

(For Indoor Use Only)

Input: 120V-60Hz, 0.08A

Output: 28V-0.107A

Figure 1

("Light Your Tree Easy" System)

STORAGE

First unplug the power cord from the wall outlet.

Remove all holiday decorations,disassemble the two sections and secure them in place.

All lamp post parts can be replaced in its original carton and should be stored in a cool and

dry place.

WARNING FOR SAFETY USE

1. Never allow any part of the lamp post to contact a source of heat or flames.

2. Caution: Artificial greeneries have small parts which may pose a choking hazard if

detached from the branches. Keep out of reach of small children and pets.

3. Always position the light string cord or any extension cord so that they will not be a

hazard to the elderly,children and pets.

4. Always fully insert electrical plugs into a receptacle.

TROUBLE SHOOTING TIPS

For pre-lit trees, if the tree does not illuminate:

1. Please check to make sure that the power cord is plugged into the wall outlet.

2. Please check for loose,broken or missing light bulbs and replace as needed.

3. This lamp post is powered pole, if the powered pole connection is loose,

please email us for solution.We can replace one set line connector.

SPARE PARTS

For pre-lit tree, spare bulbs are included.

Please check attached manual for replacement guide.

If extra parts are needed, please contact our customer service center.

Email: [email protected] or Call toll-free: 1-844 946 8733