- ページ 3
ウォーター・ディスペンサー AmeriFlow F3のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AmeriFlow F3 7 ページ。 Filterpack systems
ページを印刷するWARNINGS
1. Only use with potable water supplies
(Water must be microbiologically safe).
2. Installation of F/P system must comply
with state and local laws and regulations.
3. Check for leaks after installation or
service. Check for leaks periodically
thereafter. A system may be inadvertently
moved or jarred while other items are moved
under the sink. If a fitting is accidentally
loosened, a leak could result causing dam-
age to your cabinet.
4. Do not let system freeze. Allow system to
warm up to room temperature before install-
ing. It is best to be installed indoors with air
temperature between 60° - 85° F.
PHOTO OF FILTERPAC AND CONTENTS LIST
F1
D
E
B
A
C
F2
D
E
B
A
C
6 F1, F2, F3 FILTERPACKS 08/11 6
5. Attach to cold water supply only.
6. Water containing iron in excess of 1ppm will
require some pretreatment. Consult your local
water authority.
7. Replacement of the Filterpak component
should be with one of identical specifications,
as defined by the manufacturer, to assure
the same efficiency and contaminant
reduction performance.
8. Failure to follow recommended service
intervals or use of filters and parts other than
those recommended by the manufacturer may
void warranty.
9. We recommend having all porcelain/
enamel-coated sinks professionally drilled.
F3
D
E
B
A
C
A. Faucet and tubing
B. Easy Tap Adapter
C. Screws
D. Tubing
E. FilterPac Unit
(image may vary
from model in box)
INSTALLATION PROCEDURES
STEP 1 SYSTEM POSITION
The Filter system needs both a water supply
and access to a drain. The Filterpak system is
designed to fit under most sinks. The kitchen
sink is the most common location for the Filter-
pak install. Remove all system components from
boxes and determine the location for placement
of the Filter Pac module and faucet.
If you desire to hang the Filter Pac use mounting
STEP 2 FAUCET INSTALLATION
A. Check for an extra hole in the sink. You
must drill a 1¼" hole for the faucet if the sink
does not have one.
Determine Location of Faucet Hole. Check
underneath sink before drilling. Make sure
there are no obstructions.
Drilling a Stainless Steel Sink. Drill a 1¼"
hole with a hole saw or hole punch for an
air-gap faucet. Smooth out rough edges with
a file if necessary.
A Porcelain/Enamel-Coated Stainless or
Cast Iron Sink.
The manufacturer recom-
mends having this type of sink profes-
sionally drilled
because of possibility of
chipping or cracking. If you are attempting to
drill, use extreme caution. Obtain the proper
tools necessary to drill through the sink mate-
rial. Follow the drill manufacturers instruc-
tions for your type of sink. Place an old towel
under the sink to catch any metal filings and
to make clean up easy. After drilling, clean
up metal filings quickly to avoid staining the
porcelain.
screws, placing them to align with holes in the
bracket (make sure the cabinet wall is thick
enough to support the Filter Pac module
and that the mounting screws will not pierce
through the wall). Hang Filter Pac module to
assure sufficient space is allowed. Remove
Filter Pac module from the wall for now and
continue with install.
FIGURE 1
countertop
F
faucet stem
black locating washer
flat washer
lock washer (optional)
lock nut
plastic tube support
plastic ferrule
1/4" compression nut
1/4" filter tubing
F1, F2, F3 FILTERPACKS 08/11 7
A
B