- ページ 10

水システム DAB FEKAFOS 280のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。DAB FEKAFOS 280 19 ページ。

6. PUMP INSTALLATION

Not applicable for models Fekabox 200 – Fekafos 280 – Fekafos 550 which have the pump already fitted

inside.

Ensure that the difference in level between the pump and the sewage network is compatible

with the pump performance.

Fekabox 200 l: For references of the details see diagram on page 41

The Fekabox range is equipped with a 2" and 1"1/4 polypropylene lowering device with anti-rotation bracket,

and therefore intended for only one automatic single-phase pump with float ≤ 20Kg.

A. Remove the tank cover.

B. Extract the slide (3) from the coupling foot (5)

C. For FEKA 600: screw the special 2"F-1"1/4 M coupling (2.1), onto the lifting slide (3), and of the pump

(see fig. 7)

D. For FEKA VS-VX



the slide (3) onto the pump body (see fig. 7)



Remove the screw (1) from the pump body



Assemble the anti-rotation bracket (2) on the slide and then re-tighten the screw (1)



check that the length of the pump float is 250 mm (see page 41, fig 8A).

E. Reposition the slide/pump assembly on the foot (5) already fixed inside the tank.

Fig. 7

Feka VS-VX

ENGLISH

2.1

Feka 600