- ページ 8
ロックス Door Guard Pty Ltd TS-MOR-SLV-05のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Door Guard Pty Ltd TS-MOR-SLV-05 12 ページ。
ページを印刷する
4-2. Unlock (The Admin unlock)
1. After mobile phone and door lock connected，turn on Bluetooth and network--click the connected door lock
device---"
" to unlock. (The phone is within 5 meters from the door lock)
2. The Admin password unlock, after mobile phone and door lock connected, open the APP---click connected
door lock device--click "
" on the upper right corner of the interface---see Admin passcode--input passcode ---
"#"to unlock.
3. Mechanical key unlock, use a screwdriver to open the round keyhole cover on the front panel, then use
mechanical key unlock.
4. When you are in the room, use thumb-turn on back panel to unlock.
4-3. Lock
1.Press and hold "#" about 5seconds to lock.
2.Set auto lock, click the connected door lock device--click "
" on the upper right corner of the interface---auto
lock--choose set time 5s – 120s---OK . （ps：This operation must be near the door lock and need to be
connected to Bluetooth）
3.Mechanical key lock door, use a screwdriver to open the round keyhole cover on front panel, then use
mechanical key lock the door.
4.When you are in the room, use thumb-turn on back panel to lock door.
4-4. Modify the Admin password
Click the connected door lock device---click "
" on the upper right corner of the interface---Admin passcode-
-input the APP account login password---input the new Admin password（7-8digits）--- save.（ps ： This
operation must be near the door lock and need to be connected to Bluetooth）
4-5.Modify the Admin
A door lock can only have one Admin at the same time，you need to delete the original Admin first if you want to
modify the Admin. find the door lock device that you want to modify the Admin---slide to the left---delete---click it--
-input the APP account login password--- ok.（ps ： This operation must be near the door lock and need to be
connected to Bluetooth）
4-6. Bluetooth key remote authorization (
Admin' s phone can remotely send electronic keys to other users to
unlock)
Click the connected door lock device---"eKey" on the bottom of the interface---choose"Permanent" or "Timed"---
input the receiver's APP account（the receiver must be download the APP and register an account）--- "send" .
（ps ： This operation need to be connected to Bluetooth and network）
Door Guard Pty Ltd 8
For more information please visit : www.doorguard.com.au
For Help and Support please send an email to : [email protected]