- ページ 7
GPS astra telematics AT240のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。astra telematics AT240 12 ページ。 Advanced vehicle tracking device
astra telematics AT240 にも: インストレーション・マニュアル (5 ページ)
AT240-STD (Standard) Kit Contents
Our AT240 standard kit is supplied with a CB001 power / ignition cable and a CB243 plug-and-
play cable for easy connection of accessories.
CB001 Power / Ignition Cable
This 3-way fused cable is used to connect a permanent voltage source (i.e. power), ground and
an ignition-switched voltage source (i.e. ignition sense) to the AT240 device. The CB001 is fitted
with our standard 4-way power / ignition connector, which mates with a matching connector on
the CB243 cable.
CB243 Plug-and-Play Cable
The 30-way AT240 cable is terminated to suit the CB001 power / ignition cable (above), and also
allows easy connection of our optional accessories. Note that each accessory is fitted with a
unique connector, which matches only one of the available CB243 connectors, hence preventing
incorrect termination. The following optional accessories are available from Astra Telematics and
supported by direct connection to the CB243 cable:
IB001 iButton driver ID probe
CB242 OBD cable
CC001 Contactless CANBus adapter
BZ001 Buzzer
CR001 RFID/NFC Card Reader
DB001 Driver Behaviour Indicator
For installation information, please refer to our AT240 Installation Guide