- ページ 10
グリル Ameritrax D.W. Boogity Grill ProfessionalのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Ameritrax D.W. Boogity Grill Professional 13 ページ。 Portable barbecue & stove
REGULATOR VALVE & LP GAS BOTTLE INSTALLATION
WARNING
- Prior to assembly and leak test, inspect Regulator Valve and LP Gas bottle for
damage, dirt or debris accumulation. Clean out if present. Replace if damaged.
WARNING
- NEVER depress dial control on the Regulator Valve during installation.
CAUTION
- Make sure Regulator Valve is in the OFF position prior to installation of LP Gas bottle.
Step 1.
REGULATOR VALVE TO LP GAS TANK INSTALLATION.
Remove cap from end of LP Gas bottle.
While holding Regulator Valve in one hand, and the
LP Gas bottle in the other, insert threaded end of
the LP Gas bottle into the Regulator Valve. Apply
gentle pressure while inserting threaded end of LP
Gas bottle and turn clockwise into the Regulator Valve.
Hand tighten only until a snug fit is achieved.
Step 2.
REGULATOR VALVE TO BURNER BAR INSTALLATION.
With one hand, firmly grasp installed Burner Bar.
With other hand, firmly grasp LP Gas bottle with
Regulator Valve dial control pointed downward.
Line up the notch in Regulator Valve with the
detent located inside the nozzle end of the Burner Bar
and insert Regulator Valve into Burner Bar nozzle.
When Regulator Valve has completely engaged the
Burner Bar, gently rotate the Regulator Valve until
LP GAS bottle rests securely on level surface.
Regulator Valve will lock into place.
ATTENTION
- Notch in Regulator Valve MUST engage detent in the nozzle end of the
Burner Bar.
WARNING
- NEVER hang LP Gas bottle off the edge of a table surface. Rest the base of the LP
Gas Bottle at an angle to the surface on which the Grill is resting.
WARNING
- FOR YOUR SAFETY. We recommend the use of one pound LP Gas Tank bottles.
NEVER hook-up gas line hoses or LP Gas tanks larger then one pound.
DANGER
-
NEVER use Natural Gas with this Grill. Grill is designed for Propane Gas only
WARNING
- NEVER use tools to tighten Gas Bottle to Regulator Valve. Over-tightening will
cause damage to threads on Regulator Valve, which may result in gas leakage.
10
.