- ページ 4
ゲートオープナー DoorHan Sectional-1200のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。DoorHan Sectional-1200 16 ページ。
ページを印刷する
1
Tools
Tools required for installation of operator SECTIONAL:
1. set of spanners
2. set of slotted and cross screwdrivers
3. set of drills for metal
4. set of drills for concrete
Materials for installation of operator SECTIONAL and accessories (if available):
Cable 2x0.5 mm2 (photocell transmitter, step-by-step control button)
Cable 4x0.5 mm2 (photocell receiver)
Cable 2 x 1.5 mm2 (supply)
use the cables with voltage appropriate insulation.
Cables with voltage 230 V АС must be laid out by qualified technician.
Cabling shall have protective flutes, do not allow contact of cables and moving elements of the gate.
This operator complies with the requirements of European Directives 98/73/EC, 89/336/EC, 1999/5/EC
SAFETY AT INSTALLATION
1.
Important! read carefully this manual to ensure safe installation and operation, improper installation and improper use can cause
injury to people.
2.
Before installation read carefully this manual.
3.
remove package of the item and dispose of it. Keep the package materials away from children.
4.
save this manual for future reference in case of maintenance during the whole operating period of the operator.
5.
this product was designed for automation of sectional gates; its misuse can cause injury and health hazards.
6.
doorHan shall not be held responsible in case of injury due to misuse of the item.
7.
do not install the equipment in premises containing quick inflammable substances or other dangerous environments, as it can cause
explosion or fire.
8.
mechanical units of gates shall meet the requirements of the standards en 12604 and en 12605.
9.
doorHan shall not be held liable in case of improper installation of the item and damage at operation.
10.
Installation shall be performed in accordance with the standards en 12453 and en 12445. For countries, which are not eC members,
the said measures are to follow in order to ensure standard safety level.
11.
switch off the power supply before installation and maintenance.
12.
mains supply shall be connected to the automatic system via automatic switch with a minimal distance of 3 mm between the neighboring
contacts. It is recommended to use an automate 6А.
13.
safety devices of the operator protect against entrapment by closing the gate.
14.
doorHan shall be not held responsible for unstable run of the automatic system when using safety devices and accessories, which
are produced by other manufactures without agreement with doorHan.
15.
It is highly recommended to use optional equipment doorHan, as the accessories, which are produced by other manufacturers, can
damage the automatic system.
16.
When carrying out maintenance, it is also recommended to use original spare parts doorHan.
17.
do not change components of the automatic system.
18.
Be sure that after completion of installation the installer has shown the user how to release the gate in case of emergency and has
instructed you on proper operation and maintenance of the automatic system.
19.
do not allow people to be present in the automatic system coverage area when the automatic system is working.
20.
never let children play in the area of or close to the moving gate and in the area of or close to the working operator. Keep all remote
control units of operator and stationary control buttons away from children.
21.
passage is only allowed when the gate has stopped and the operator is off.
22.
repairs may be carried out only by qualified personnel, which was trained and certified at the authorized centre doorHan.
23.
Check monthly good order state of the safety sensors (recommendation: use a wooden block with a height of 50 cm as an obstruction.
this obstruction shall cause stopping of the gate or its opening).
24.
maintenance: make diagnosis of the system seCtIonal at least half-yearly, the special attention shall be paid by check of the gate
travel smoothness when in released state and operation of the release.
25.
It is forbidden to carry out any actions, which are not allowed by this manual.
4
I n s t a l l a t I o n a n d o p e r a t I n g m a n u a l s e C t I o n a l - 7 5 0 / 1 2 0 0
5. pliers
6. Hacksaw for metal
7. drilling machine
8. tape measure (folding rule)