- ページ 3
ゲートオープナー DoorHan SHAFT-20のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。DoorHan SHAFT-20 12 ページ。
ページを印刷する1.2. TECHNICAL SPECIFICATIONS
Specifications
Power supply, V/Hz
Power demand, W
Torque, Nm
Motor speed, rpm
Shaft hole, mm
Intensity, %
Thermal protection, °С
Protection class
Dimensions, mm
Weight with control unit, kg
Operating temperature range, °С
1.3. DELIVERY SET
Upon receiving the operator, unpack it and inspect visually. Make sure, that the operator is not damaged. If
any damages are found, please contact your supplier.
The operator components included in the standard package are listed in the following table.
№
1
2
3
4
5
6
2. SAFETY INSTRUCTIONS
WARNING! It is important for the safety of persons to follow safety instructions carefully. Keep these
instructions.
•
Follow all instructions since incorrect installation can lead to severe injuries.
•
Shaft-20 is designed for automation of residential sectional doors. Do not use the operator for other than
intended purposes.
•
DoorHan shall not be liable in case of personal injury caused by misuse of the product.
•
Prior to installation of the operator make sure that the door is balanced and moves smoothly.
•
Installation must be performed in accordance with the standards EN 12453 and EN 12445. These requirements
are to be met in non-EU countries for ensuring the required safety level.
•
Check if the door conforms to the standards EN 12604 and EN 12605 (see documentation accompanying the
door). For non-EU countries the above mentioned requirements shall be met in order to obtain an appropriate
safety level.
•
Mechanical door units shall conform to the standards EN 12604 and EN 12605.
•
Prior to installation of the operator check that its location is suitable by its climatic conditions to technical
specifications of the operator.
•
Do not install the operator in premises containing quick inflammable substances or other hazardous media
as it can cause explosion or fire.
•
During operator assembly, installation and adjustment use tools specified in section «Tools» of this manual.
Name
Operator with control unit
Mounting bracket
Remote control push-button panel
Locking ring
Set of fastenings
User manual
SAFETY INSTRUCTIONS
Values
220-240/50
300
20
1400
25,4 (with key way)
50
120
IP 20
230x250x170
8,5
-20...+55
Quantity
1 pc.
1 pc.
1 pc.
1 pc.
1 set
1 pc.
3