- ページ 3

オール・イン・ワン・プリンター Canon PIXMA MP500のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MP500 39 ページ。 Continuous ink supply system
Canon PIXMA MP500 にも：仕様書 (2 ページ), ここからスタート (2 ページ), 補足マニュアル (6 ページ), インストール手順 (9 ページ), クイック・スタート・マニュアル (2 ページ)

Install the software

Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select

Custom Install in order to choose the options you would like to install.

IMPORTANT

• Temporarily close any open applications, including anti-virus software. Computer security programs

can be re-started after software installation.

Installing the Printer Driver - Windows

• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this

version before installing the new version. For instructions on uninstallation, refer to the guides for that

version of MultiPASS Suite.

• You must log on as an administrator or have administrative privileges in order to install the software in

Windows XP or Windows 2000.

• Do not switch users during the installation process.

• If the following screen appears, the USB cable is connected.

Perform the following steps.

1. Press [ON/OFF] to turn off the machine.

2. Disconnect the USB cable.

3. Click [Cancel].

Installing the Printer Driver - Macintosh

• Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not

supported.

• Enter the name and password for an Administrator Account if required.

Perform the following to make sure the driver has been installed correctly

1. Select [Applications] from the [Go] menu.

2. Double-click the [Utilities] folder, then the [Printer Setup Utility] ([Print Center] when using Mac OS

X v.10.2.x) icon.

If the printer is displayed in the [Printer List], the printer driver is installed.

If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select [USB]

from the pop-up menu. Select [MP500] from the [Product] list and click [Add].

When connecting from Mac OS X v.10.3.3 or earlier:

Restarting the computer while connected to the machine may cause the machine not to be detected. To

resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back

ON again.