- ページ 7
計測機器 DAC VS RecorderのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。DAC VS Recorder 13 ページ。
ページを印刷するStep 11
During the installation, you may receive a
prompt asking if you would like to install
this device software.
Click Install.
Step 12
If the voice card driver installer finds a
voice card, it will list the serial number.
Click OK and then on the following screen
click Finish.
You will go back to the VS Recorder
installation screen.
Once the installer is finished, click Close.
Click OK to the confirmation prompts.
Now Reboot the computer.
Step 13
Once Windows has loaded, the voice
card's green light should be blinking,
meaning the Recorder is running. Only
one port will be active until the serial
number has been verified online.
Note: If the internet is enabled, connect the
computer to the internet and reboot again. If
the serial is valid, all remaining ports will be
activated.
Step 14
If you are running VS Recorder on a
Windows
shortcut on the desktop needs to be ran
as an administrator in order to work.
To set this, right-click the icon and go to
the Compatibility tab.
Then check the Run this program as an
administrator box.
Click OK.
Pg. 7
8
computer,
the
Monitor
VS Recorder – Installation
visit us online @ www.dacsolution.com