- ページ 5
オール・イン・ワン・プリンター Canon PIXMA MX330のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MX330 37 ページ。 Cartridge reset
Canon PIXMA MX330 にも: マニュアル (4 ページ)
- 1. Getting Started
- 2. Remove the Protective Material
- 3. Connect the Telephone Line
- 4. Turn the Power on
- 5. Install the FINE Cartridges
- 6. Set up for Fax Reception
- 7. Install the Software
- 8. Loading Paper
- 9. After Installing the Machine
- 10. Try Using the Machine
- 11. Try Copying
- 12. Print Photos from a Computer
- 13. Send Faxes
- 14. Maintenance
- 15. Specifications
3
Connect the Telephone Line
To use the machine as a fax, a telephone
line needs to be connected.
This section describes the basic method of
telephone line connection.
For other connection methods, refer to the on-
screen manual: Basic Guide.
Go to "4 Turn
When not using
the Power On"
as a fax:
on page 4.
When using as
both a fax and
telephone:
When using as
a fax only:
•
If you cannot send faxes after installing the
machine, check the telephone line type. For
details, refer to "Confirming the Telephone Line
Connection" in the on-screen manual: Basic
Guide.
1
Connect the machine with a telephone line using the
supplied telephone line cable (A).
When using as a fax only:
Go to "4 Turn the Power On" on page 4.
only
1
2
A
Remove the telephone connector cap (B), then
connect a telephone with the telephone line
cable.
•
Do not connect the machine and a telephone in parallel
to the same telephone line using a distribution adapter.
The machine may not operate properly.
3
2
4
5
6
7
Only when connecting a telephone:
B
8